Milwaukee Hole Saw Cheap

Milwaukee 49-22-4095 Electricians Ice Hardened Hole Saw Kit, 10-Piece

2010-08-13T05:29:00.003-07:00

Buy Cheap Milwaukee 49-22-4095 Electricians Ice Hardened Hole Saw Kit, 10-Piece

Buy Low Price From Here Now
10-Pc. Hole kit includes cryogenically hardened hole saws in sizes used often by electricians. Professional Series: Yes, Saw Size (in.): 7/8, 1 1/8, 1 3/8, 1 3/4, 2, and 2 1/2, Ice Hardened: Yes, Saw (qty.): 10
Readmore

Technical Details

- ICE HARDENED for up to 50% longer life than the competition
- Matrix II Bi-Metal Teeth for greater durability
- Positive Rake Angle for fast cutting
- Radiused Tooth Back reduces stress on teeth
- Deeper Gullets for fast chip removal and Funtional Slot Geometry provides easy plug removal
See more technical details

"Great Hole Saw Set!" 2009-04-26
By Discover
I mod computer cases and use these constantly to cut cooling fan holes in aluminum cases. I also use them for everyday home projects and they are every good quality hole saws. Highly recommend.

Images Product

Buy Milwaukee 49-22-4095 Electricians Ice Hardened Hole Saw Kit, 10-Piece Now

King Arthurs Tools 35818 Squire 18 tooth, 5/8" center hole

2010-08-13T05:29:00.001-07:00

Buy Cheap King Arthurs Tools 35818 Squire 18 tooth, 5/8" center hole

Buy Low Price From Here Now
Lancelot Woodcarving Discs take the muscle work out of woodcarving with their speed, power and maneuverability. The secret is in the special chain saw blade which is securely held between two stainless steel plates. Mount the 4" dia. Lancelot in your 4" or 4-1/2" angle grinder and watch the chips fly! It easily cuts the hardest woods regardless of grain or knots. The 14-tooth model is great for "roughing out" the 22-tooth model and leaves a smoother "finished" surface. Teeth can be resharpened using a standard chain saw file. Maximum 14,000 RPM. Chains can not be interchanged between models. Squire Mini Woodcarving Discs can be attached to another disc for the ultimate in power carving! It can be used alone as a small carving disc by attaching the 3-3/8" dia. Squire to a Lancelot Disc with the Universal Mounting Nut. You can effectively double your cutting capacity. You not only remove waste material faster but curved work, like the inside of bowls, is easier and smoother than when using a single disc. Fits all mini grinders with 5/8" x 11 TPI arbors.
Readmore

Technical Details

- Speed
- Power
- Chain Saw Blade
- 4" Diameter
- Max. 14,000 RPM
See more technical details

"Lancelot" 2009-05-12
By Andres Barnett
This is not the first time i order one of these carving discs. Disc comes sealed and packed well, cutting chain comes with a little of oil so it will not get rusty. Sharpness of all thooths is extraordinary. Have made several wooden projects very fast. USE WITH CAUTION, EXTREMELY DANGEROUS IF NOT USED PROPERLY. Decided to purhcaise a second for tandem configuration, also purchaise the smaller one (Squire). 100% recommendable to any woodworker, just be sure to read which angle grinders wont work with the disc, i belive killer brand doesnt, but be sure. I recommend searching on youtube several videos, and check their website, you will find there videos and all posible configurations and more important that that WHAT NOT TO DO.

Images Product

Buy King Arthurs Tools 35818 Squire 18 tooth, 5/8" center hole Now

Mirka 23-614-180 5" 5-Hole 180 Grit Dustless Hook & Loop Sanding Discs - 50 Pack

2010-06-24T17:35:00.001-07:00

Buy Cheap Mirka 23-614-180 5" 5-Hole 180 Grit Dustless Hook & Loop Sanding Discs - 50 Pack

Buy Low Price From Here Now
Mirka Abrasives INC 23-614-180 - Bulldog Gold - 180G 5" 5-HOLE GRIP DISC 50/BX - Premium paper for finishing as well as heavy stock removal - Durable aluminum oxide grain delivers a fast, exceptionally long lasting cut - High strength resin bonded system - C & D-weight backings are 50% stronger than other premium brands using A-weight backings - Made with an anti-load stearate to provide increased life.
Readmore

Technical Details

- Sanding discs have a special sharp, durable aluminum oxide grain
- 5 inch 5-hole dustless hook & loop
- Fits: Porter Cable 97355 and 333
- 50 in a box
- Grit -180
See more technical details

"the best papaer and a fine value" 2008-05-14
By Ms. George D. Schultz
I can't say enough abouth this paper. It is by far the best sandpaper that you can buy for the money. The grit selections are uniform, and the paper backing lets you use the sandpaper far longer than ordinary generic types. This type of paper lasts as long as the project you are working on and if it wears down, hold onto to it for smaller tasks which don't require as much grit. The backing , when used with power sanders is tough enough to keep from damaging your pad if you should get a slight tear in it.

Buy this Mirka brand. You can pay more for a different brand, but why would you want to?

"Best I've Ever Used" 2002-03-20
By
Long lasting,stiff backing,doesn't block up easily. Wish this brand was available in 2" rolls,for Delta drum sander. Outlasts other brands at least 5:1 in custom cabinet shop!

Images Product

Buy Mirka 23-614-180 5" 5-Hole 180 Grit Dustless Hook & Loop Sanding Discs - 50 Pack Now

2pc DIAMOND HOLE SAW - CORE DRILL - Set - 1/2" + 1"

2010-06-05T02:00:00.001-07:00

Buy Cheap 2pc DIAMOND HOLE SAW - CORE DRILL - Set - 1/2" + 1"

Buy Low Price From Here Now

Readmore

Technical Details

- Hole sizes - 1/2" + 1"
- 1/4" shank
- Nickle plated - Diamond coating
- Superior performance - Great for holes in marble, Slate, Glass, Tile etc.
See more technical details

"great product" 2010-05-31
By Kathy Van Clapdurp (Lynchburg, Virginia United States)
This was fantastic! My husband said it went through the tile and backer board like butter, He even came to get me to show me what a smooth hole it made.

"great drillers for tile" 2010-01-25
By Jeffrey mr. video (hopwood pa. usa)
cuts through tiles in a minute, spray water on bit to cool, make a wood template to start the drilling, them cut right threw ceramic, used three different tile and cut them all with no problem

"drilling wire bottles" 2010-01-17
By Robert L. Tippit (boerne, texas)
good value. was able to drill 16 wine bottles without trouble. will order another drill for the next xmas season.

"not bad for the price" 2010-01-08
By Phillip Nguyen (Springfield, VA United States)
I bought this set and drilled two hole in my marble tiles. Every went smoothly and I hoped that it would last until I finish all of my three bathrooms. For this price, you can't get any better than this.

The shipping was super fast. I would recommend it.

"2pc DIAMOND HOLE SAW - CORE DRILL - Set - 1/2" + 1"" 2009-12-02
By R. Glass (Sacrramento Calif)
I used this diamond bit on my Makita battery drill bit on wine bottles. I Placed the wine bottle in water and drilled the hole. It was great. Made around 50 holes and I am still using this diamond hole saw one inch.

If it only worked for 10 holes it would be well worth the price of $10.00. 2pc DIAMOND HOLE SAW - CORE DRILL - Set - 1/2" + 1"

Images Product

Buy 2pc DIAMOND HOLE SAW - CORE DRILL - Set - 1/2" + 1" Now

Hole Pro X-230 Kit: 1-7/8" to 9" Infinitely Adjustable Twin Blade Hole Saw Cutter 3" 4" 5" 6" 7" 8" 9" Hole Wood Sheetrock Plaster Fiberglass Plastic MDF Cement Board. Use ¼ Torque of Hole Saw to Cut Twice As Fast

2010-06-01T17:02:00.001-07:00

Buy Cheap Hole Pro X-230 Kit: 1-7/8" to 9" Infinitely Adjustable Twin Blade Hole Saw Cutter 3" 4" 5" 6" 7" 8" 9" Hole Wood Sheetrock Plaster Fiberglass Plastic MDF Cement Board. Use ¼ Torque of Hole Saw to Cut Twice As Fast

Buy Low Price From Here Now
One kit takes the place of dozens of hole saws while enabling fast dust free cutting exact size holes from 1-7/8 up to 9" inches in diameter. Kit includes high quality adjustable hole cutter, ball bearing mounted ABS shield with soft rubber gasket to trap dust and shavings, user replaceable sets of both High Speed Steel and Tungsten Carbide blades, hex wrenches, and sturdy carry case. Shield keeps cutter perpendicular to work surface and cutter has adjustment knob to limit the depth of cut when making holes in walls or ceilings to avoid accidentally cutting wires or pipes.

All parts precision machined, measure bar is chrome plated and marked in both inches and millimeters. ABS composite plastic shield is made from the same material as used in hockey helmets and is lightweight, strong, and will not discolor with age. Perfect for installing recessed lights, tubular skylights, in-ceiling speakers, ceiling fans, duct vents, or providing access holes for repairs.

Kit includes user replaceable High Speed Steel blades for cutting wood, MDF, Lexan and other plastics, acoustic tile, tongue and groove, laminates, and Tungsten Carbide blades for cutting sheetrock, plaster, cement or Hardi board, fiberglass, OSB, chipboard, plywood, and similar materials. Twin blades for faster cutting and perfect balance eliminate the need for balance bars which can break off inside other cutters.

Requires ¼ the torque of common hole saws so a smaller drill can be used and cordless drills can cut more holes before needed to be recharged. ½ cord drills that are rated for maximum hole saw size of 3-1/2 inches for wood can cut holes up to 12 in diameter in plywood using the Hole Pro hole cutter.

Like all Hole Pro Power Series kits the shield can be used with the Hole Pro XL-Arbor kit to enable the use of specialty hole cutters such as tungsten grit cutters when cutting tile or stone and have the same dust control and depth control as provided with the adjustable hole cutters.
Readmore

Technical Details

- Adjustable hole cutter for cutting 1 7/8" to 9" holes in ceilings, walls and floors
- Depth of cut: 3/16" (5mm) - 1 " (25mm) cut from one side, 2" (50mm) cut from 2 sides
- Cuts plywood, sheetrock, lathe & plaster, MDF, acrylic sheet, ceiling tiles, fiberglass, etc
- For any 3/8" drill, Twin blades - User replaceable.
- Comes with one High Speed Steel blade set and one Tungsten Carbide blade set.
See more technical details

"Great tool and nice improvement over the X-200" 2010-01-09
By Phillip Marsh (Texas)
Our crews have used the Hole Pro X-200 since it was first introduced to make holes for recessed ceiling can lights. The X-200 would adjust from 1-7/8 up to 8" and worked very well. The X-230 is similar to the X-200 but the measure bar is 50% thicker and an inch longer and uses a better design for the blade holders. The X-230 works with the same 11" diameter shield as the X-200 but adds an inch so it can cut holes up to 9 inches in diameter. With the new 8" CFL recessed can lights we have to cut holes over 8-1/2" in diameter and the X-230 is the perfect tool for these jobs with its 9 inch hole cutting.

The X-230 uses the same blades as the X-200 so having both models of adjustable hole cutters is not a problem. The X-230 is really a slightly smaller version of the X-305 12" model and uses the same blade holders and same thickness of bar. Nice to see Hole Pro taking a great tool like the X-200 and making it better. I wish more manufacturers would take that approach.

We use the X-230 on both 18 volt and 14 volt cordless drills on the low range setting. You don't have to push the cutters through the material being cut the way you do with a hole saw. The large blades cut quickly and when you are done cutting the cut piece just falls out without any prying so you are ready to cut the next hole.

For some projects we have wanted discs and not holes and used the X-230 in a drill press (needs 5" clearance between the chuck and the support column) with the pilot bit out and a jig to hold the material in place for cutting. Works very well either with just the hole cutter or even leaving the shield on the tool for extra safety.

It takes a lot less power from the drill than a hole saw and I have found it easy to cut 8" holes in 5/8 plywood with 18 volt cordless drills. There is some torquing in plywood with large holes and a drill with a side handle does help. The 1-1/8 inch cutting depth is adequate for just about every wall, ceiling, and flooring hole we have had to make.

Great design with perfect balance from the two blade holders and very tough ABS shield makes for a great tool for cutting large holes in many different materials. Add in the 5-year warranty and you have a great tool that you can count on to finish the job day after day - makes a great gift too!

"Great tool - fast and easy to use and no cleanup" 2010-01-07
By Peter Mitchell
What I like about this tool, besides how well it it cuts, is that the clear shield does a great job of catching all the shavings and the cut piece, makes it easy to get a perfect straight in cut, and adjusts to limit how deep you cut. With 5/8" thick ceiling sheetrock or 5/8" tongue and groove wood ceilings I can set the depth to about 3/4" and not worry about cutting into wiring, pipes, or insulation. The shield is strong enough to stand on and yet is very lightweight and the slots catch all the shavings so you can see what you are doing even when cutting into a ceiling. The absence of a cross brace as with cheaper versions I have used, makes it easy to wipe the shield clean at the end of the day - no need for a compressor to blow out the dust.

The blades are top quality. I have cut more than 200 holes in TJI with a single set of the tungsten carbide blades and used these blades to cut holes quickly in Hardie siding, plaster and lath, OSB, plywood, and even fiberglass. The high speed steel blades which also come with the kit are perfect for wood, T&G, and plastic sheet goods.

I found that when running wires I could adjust the blades by 2 measure marks and pre-cut plugs out of scrap sheetrock ahead of time. Then when I make the hole for the wire pulls I have a perfect patch that is ready for mud and some paint. This is a real time saver and the patch meets fire codes.

I liked that it goes from 2" up to 9" which means it works for every recessed light can on the market, including the new 8 inch CFL light cans. Used to be there were only 4 sizes, now there are dozens and I don't know what cutout size is needed until I open the box and look at the template. Once I set the hole cutter to the right size for the hole I need I can cut holes in seconds and a lot less time than it used to take just to trace the circle on the ceiling.

With all the dust going into the shield I don't have to move furniture or lay tarps or get out the shop vac when I am done. And I do not worry about accidentally cutting a wire or cracking plaster and turning a small job into a big one.

Hole Pro provides a 5-year warranty which is unusual for any tool and says a lot about the quality of the tool and the people behind it at Hole Pro.

"Easy to use, makes very clean holes" 2009-11-15
By Aaron K. Olmstead
I'm very pleased with the Hole Pro I bought. It's pricey, but, as long as you've got a high-torque drill, it makes neat, tidy holes in sheetrock, without the ragged edges I get with the traditional hole saws I've used. The dust cup thing really does work. Tip: get the blades spinning fast, freely, then press them gently into the surface you're cutting, to avoid jamming. I regret I only got this at the end of my recessed lighting project!

"great hole cutter and very well built" 2009-07-23
By Michael Winters
I have used a variety of adjustable hole cutters and hole saws for shop and construction work over the years but none that work as well as this twin blade hole cutter. The blade design enables my DeWalt 1/2" cordless drill (manufacturer rated for maximum 3-1/2" hole saw in wood) to cut 10" holes in plywood and Hardie board in less than a minute.

Holes in sheetrock take seconds and all the dust and the cut plug are held inside the shield and quickly fall out when the cutter is flipped over to dump everything into a 5-gallon bucket. I don't need to tape up plastic sheeting or even use a drop cloth when cutting holes for can lights in sheetrock or plaster ceilings.

The 1-7/8" to 9" size range is great for installing light cans. Last year I put in light cans that took cutouts from 2-1/4" up to 8-5/8" and this tool was all I needed. I have seen carbide grit hole saws for can lights but they only come in 4-3/8, 6-3/8, 6-5/8, 6-7/8 inch sizes and while that used to work for tungsten lights in the past, now there are over 20 different diameter cans stocked just at Home Depot and most of them are not in these old standard sizes. Even so, the cost of just these 4 hole saws runs well over $200 and when they wear out you need to spend $50-70 for a new one. With the X-230 a new set of tungsten carbide blades is only $17 and I always have a spare pair in the tool's carry case.

The high speed steel blades are great with wood and most plastics. I did 21 holes 7-1/8" diameter cutouts in 5/8" tongue and groove ceiling last month and I took less than an hour to cut the holes and there was no splintering. I also was able to use the orange adjustment knob to set the cutting depth so I did not have to worry about cutting the electrical wires that were already run in the space above the ceiling.

I have even used this hole cutter for production jobs where I have cut out hundreds of discs in 3/4" plywood or MDF and the blade holders cinch down tight so I get exact size holes or discs time after time. I leave the shield on just to keep my hands out of harms way but it can be used without the shield on a drill press as well.

For cutting without a drill press the ball bearing mounted shield keeps the hole cutter straight so it is like having a very light and portable drill press when cutting holes in 4x8 sheets where a drill press is not going to work. Even cutting can or vent holes or putting audio speakers holes in the ceiling having the shield makes it easy to get straight side cuts so the grills and trim rings all sit flush and look neat and professional every time.

It surprised me at first how well it cut wood with a 18v cordless hand drill and cutting holes in sheetrock was fun instead of a chore. I now even use the hole cutter to make access holes for running wire or making repairs. I cut 3-1/4" plugs ahead of time in a piece of scrap sheetrock and then cut the access holes 3" in diameter. After the wire has been pulled I screw a small piece of wood to the wall or ceiling as a backing and then push in the sheetrock plug and add a 3rd sheetrock screw in its center. I can do one thin coat of mud and the patch is ready to paint. I can do this in no time at all and the end result is a very clean patch and happy customers. They can paint the patch themselves the next day and no need for another worker to come and patch a large hole in the drywall.

I replaced a shower mixer valve by cutting a 8" diameter hole in the wall on the other side and after I was done soldering in the new valve I cut a 8-1/4" plug and patched the hole. So much better than cutting out the sheetrock stud to stud and a whole lot faster to do. When I do work for hospitals and hotels they cannot use the room until there is an airtight seal (and using fireproof materials) so they really appreciate it when I do the work and leave them with a ready to paint wall or ceiling.

I have a couple models of single blade adjustable hole cutters, NORA 6" and LSD Inc.'s HC-12, but the Hole Pro twin blade hole cutter is superior in every way imaginable. With twin blades there is perfect balance and no balance bars to change. With balance bars if they are under tightened or over tightened they break off and leave the threaded section inside the tool. The twin blades are easy to adjust with the way the bar is marked. Put one at 7" mark on each side and you get a 7" hole - no math needed. The high speed steel blades on the X-230 are great for cutting wood but the bits provided with the NORA and the LSD Inc. kits do not work well at all.

This tool is built to cut holes faster and cleaner than any other way I can think of and it is built to last year after year and not let you down in the middle of a job. After I let one of my crews use this hole cutter I had to buy ones for the other trucks as they were fighting over who got to use it.

"Well built, easy to use" 2009-03-30
By Lost My Mind (California, United States)
The Hole Pro X-230 is a well built tool that makes the task of cutting holes much simpler. If you are required to cut holes into drywall, you cannot live without this tool. It is also capable of cutting woods, plastics, and other materials.

This worked great with my puny 14.4v Dewalt drill. The plastic shield does an *excellent* job of containing dust, debris, and flying chunks. Anyone doing renovation work or a job where cleanup is a big issue, this is a must have tool. I cannot ever imagine going back to cutting holes with a drywall saw.

All of the parts are heavy duty and well built. The shield doesn't leave marks, the blades are strong, and the spinning motion is perfectly balanced. Do not waste your money with the cheaper imitations (~$50).

Because the saw blades are adjustable, this can literally replace a dozen hole saws of various sizes. The only reason to keep hole saws is for specialty applications such as cutting metal or tight locations. While the shield is removable, the "bar" that the blades attach to is a fixed length.

Images Product

Buy Hole Pro X-230 Kit: 1-7/8" to 9" Infinitely Adjustable Twin Blade Hole Saw Cutter 3" 4" 5" 6" 7" 8" 9" Hole Wood Sheetrock Plaster Fiberglass Plastic MDF Cement Board. Use ¼ Torque of Hole Saw to Cut Twice As Fast Now

DEWALT DW1803 Heavy Duty 7/16-Inch Shank Quick Change Mandrel (Fits Hole Saws 1-1/4-Inch - 6-Inch)

2010-05-08T17:33:00.001-07:00

Buy Cheap DEWALT DW1803 Heavy Duty 7/16-Inch Shank Quick Change Mandrel (Fits Hole Saws 1-1/4-Inch - 6-Inch)

Buy Low Price From Here Now
The DeWalt DW1803 7/16-Inch Quick Change Mandrel is used with a 1/2 inch or larger chuck and 1-1/4- to 2-1/8 inch hole saw. The primary application of a hole saw is to install pipe, copper tubing, or PVC. These saws can be used to cut a round hole in either wood or metal, and when used with the proper mandrel, they will fit most drills.
Readmore

Technical Details

- Heavy-duty 3/8-inch shank mandrel with a spring-loaded collar for quick changing
- Patented Pilot Tip allows for faster penetration of materials
- Double-set screws and a recessed combination head make it easy to change centering bits
- DEWALT offers a full range of standard and quick change mandrels for versatility in a wide range of hole saw applications
- Pilot bits feature the patented DEWALT Pilot Point (R) tip for faster material penetration, particularly in metal
See more technical details

"This is a great shank for hole saws." 2009-07-31
By Adrian Michaud (East Coast, USA)
I love the quick change mechanism on this shank. It's very secure and makes quick changing of hole saws very easy.

"Indusrial Production-Light Gauge Steel, Plastic, & Stainless" 2009-03-17
By DoogieWater (Houston, TX USA)
I have utilized several manufacturer's hole saw mandrels performing electrical work, routinely drilling light guage steel, aluminum, bronze, silicon bronze, stainless steel, plastics, and wood. Some mandrels are difficult to change from one size hole saw to the next because of inexpensive hex set screws stripping. Soooo aggrevating! Others, made like the Dewalt mandrel compare with an exposed spring release, but the spring being exposed, many times shavings interfere, it can be damaged, ruining the spring and making it difficult to unscew the locknut. I have found the Dewalt Mandrel to be easy and durable. Of course, drilling with hole saws can be dangerous and one should always be cautious, not agressive, allowing the saw to perform at it's own rate, especially when penetrating a variety of materials. I have yet to have this mandrel break or cause problems. It has proven to be very reliable, and I have been utilizing it for almost a year, drilling hundreds of holes (2-3/8" - 4-1/2"). I am sure, as with most attachments for power tools, even with the best of care, they will eventually have to be replaced. But, at this rate, my DeWalt Mandrel has paid for itself several times and has proven to be very effective and safe. "SAFETY FIRST"

"DW1803 Mandrel" 2007-10-17
By John D. Wheeler (Cox's Creek, Kentucky USA)
Appears to be a well built product. I've had frustrations with the quick change collar releasing while using it and results in a stuck mandrel in the hole saw. Today, after many years of use, one of the two pins in the quick connect broke off. I'm confused how it managed it, since the engineering would make one think it would be impossible.

Images Product

Buy DEWALT DW1803 Heavy Duty 7/16-Inch Shank Quick Change Mandrel (Fits Hole Saws 1-1/4-Inch - 6-Inch) Now

Kreg Hex Shank Pocket-Hole Drill Bit

2010-05-08T07:48:00.001-07:00

Buy Cheap Kreg Hex Shank Pocket-Hole Drill Bit

Buy Low Price From Here Now
This replacement 3/8" diameter step drill bit with 1/4" hex shank is part of Kregs offering of Quick-Change pocket-hole accessories.
Readmore

Technical Details

- Made specifically for Pocket-Screw Joinery.
- 1/4" hex shank works with any quick change chuck.
- Hex shank with power groove resists slippage.
- Specialized stepped bit drills guide hole for screw.
- High quiality hardened steel for longevity.
See more technical details

"Kreg Hex Shank Pocket-Hole Drill Bit" 2009-06-09
By R. Yokoyama (Pearl City, Hawaii)
Although this bit is used for the the Kreg system it is much easier to quick change it if you have to. I found it much easier and less cumbersome

to use.

"Wood working tool" 2009-04-04
By G. Collins
The bit does what it was made to do, and the hex shank keeps the bit from turning in the drill.

"Faster bit changes" 2008-11-16
By Samurai Dave (Ventura, CA)
All of my drills have a hex shank bit quick-connect adapter. I LOVE the ability to quickly swap bits rather than having several drills chucked with individual bits for the project at hand. My drills are all cordless as well and swapping bits by chucking and unchucking wastes battery power; plus the additional wear and tear on the dril components.

Of course the Kreg bit fits perfectly into the Kreg jig and produces clean pocket holes as the stock bit. It also fits into the Kreg blow-molded case (without modification) for storage.

There is a Kreg Quick Change Pocket-Hole Bit Adapter that can be fastened to the end of a stock drill bit shaft, but you will have to modify the Kreg case in order to store it.

Images Product

Buy Kreg Hex Shank Pocket-Hole Drill Bit Now

Porter-Cable 18001 6-Inch 6-Hole Hook and Loop Standard Pad for 7336 and 97366 Random Orbit Sander

2010-05-02T00:57:00.001-07:00

Buy Cheap Porter-Cable 18001 6-Inch 6-Hole Hook and Loop Standard Pad for 7336 and 97366 Random Orbit Sander

Buy Low Price From Here Now
This pad features a high-quality, durable design. Designed to fit 7336 and 97366 Random Orbit Sander, this pad features efficient, 6-hole dust collection. Installation is quick and easy with the built-in mounting thread. This 6-inch diameter pad accommodates 6-inch hook and loops discs. This item is sold individually.
Readmore

Technical Details

- Standard replacement pad for 7336 and 97366 Random Orbit Sander
- Efficient, 6-hole dust collection
- Built-in mounting thread for quick and easy installation
- 6-inch diameter
- Accommodates 6-inch hook and loops discs
See more technical details

"Adding new uses to the PC 7424 Polisher as a Sander" 2008-11-06
By F. Butler
If you own the Porter Cable 7424 Polisher the addition of the PC 18001 6-inch 6-hole hook and loop standard pad allows you to have the equivalent PC 7336 Sander - giving you in effect two separate machines. It should also be noted that the Porter-Cable 73333 Dust Collection System works with the 7424 Polisher if the 18001 standard pad in attached for sanding.

"Hook and Loop Sanding Pan" 2008-09-13
By Richard P. Hullfish Sr. (Venice, Florida)
I had a lot of vibration in my Porter-Cable random orbit sander. I replaced the hook and loop pad and WA LA the vibration was gone.

"must have" 2007-09-09
By J. Rice (Phoenix AZ)
This item completes my buffer to a great orbital sander. I use it for refinishing my Hi Macs (type of corian) counter tops as over time and hard use they need to be renewed. You must have special sanding paper 1200 to 1500 to do this.

"Porter Cable Hook and Loop Pad" 2007-01-03
By E. Alston (Springfield, MO)
The vendor shipped quick. Billing was correct. No hesitation to us again.

Images Product

Buy Porter-Cable 18001 6-Inch 6-Hole Hook and Loop Standard Pad for 7336 and 97366 Random Orbit Sander Now

2-Pack: Hol-E-Cap Cable and Cord Hole Cover Wall Plate with Hole Saw Installation Kit for Drywall - White

2010-04-28T06:14:00.001-07:00

Buy Cheap 2-Pack: Hol-E-Cap Cable and Cord Hole Cover Wall Plate with Hole Saw Installation Kit for Drywall - White

Buy Low Price From Here Now
A snap to install! Hol-E-Cap has a patented design for an easy do-it-yourself installation. Its large rotatable port accommodates most HDMI, component, composite, computer, fiber optic, and XBOX360, PS3, Wii and game console cables (1 ¼ max. width). Install it on drywall behind your flat panel TV, games consoles, DVD players and more. Installation guide also provides instructions for installing on surfaces other than drywall. Your satisfaction is guaranteed!
Readmore

Technical Details

- Clean and attractive design to hide hole for cables and cords
- A snap to install in minutes! Patented design; no special tools, screws, electrical box or template
- Kit includes 2 Hol-E-Caps, to install behind the TV and console
- Includes installation guide and hole saw installation tool
- Satisfaction Guaranteed!
See more technical details

"Easy to install and looks clean and professional" 2010-01-27
By CalBear (San Francisco, CA)
I ordered this item for my office conference room. We just installed a new flat panel monitor and I wanted the cables to have a more professional appearance. This wall cover was extremely easy to install and looked clean and professional. I will definitely use this product at home as well.

"Hol E Cap Quick and Easy to Install!" 2009-12-28
By JustLikeYou (Danville, CA)
I installed 2 Hol-E-Caps in about 5 minutes for my TV. It comes with a pre sized saw that takes only a few seconds to drill thru 0.5" sheet rock. I liked how no screws were required (hand press fit into the wall) and everything needed is included in the kit. The dome shaped design also looks natural and hides your cables well. Too easy....product recommended!

"You are gonna love this product!!!" 2009-12-17
By wwyli (Honolulu, HI)
Yup, it was easy to install and it's so much better than the cable grommets that I've used before. Hol-e-caps actually have teeth that attach itself securely onto the drywall so you don't need to glue it like other grommets. The included hole saw was a bonus!

"COMPLETE WITH FREE HOLE SAW!!" 2009-12-07
By Alejandro (Memphis, Tennessee)
WIFE LOVED IT!!!! Had to cover ugly hole on the wall where my home theater guts spilled out of the wall.. now all gone and neatly covered! HOL-E-CAP was an easy quick solution. Awesome design. Would need more of these covers for my in-ceiling surround speakers. Thank you!

"I LUV THIS PRODUCT !!" 2009-12-07
By thetamouse

Easy and fast do-it-yourself wall-hole plate, perfect for HDMI, audio plugs and CAT-5 wiring systems. Even comes with a hole saw bit. WOW, NOW THAT'S COMPLETE!

Images Product

Buy 2-Pack: Hol-E-Cap Cable and Cord Hole Cover Wall Plate with Hole Saw Installation Kit for Drywall - White Now

Black & Decker 79-368 Bi-Metal Door Lock Installation Kit

2010-04-27T19:16:00.001-07:00

Buy Cheap Black & Decker 79-368 Bi-Metal Door Lock Installation Kit

Buy Low Price From Here Now
For installing lock sets and deadbolt locks in both metal and wood doors. 1 handed rack and pinion system enables the user to quickly and easily secure the guide template to the door. Works with any door width between 1 3 8" to 2 3 8". for both standard b
Readmore

Technical Details

- Compatible with all standard-size wood and metal doors with a width between 1-3/8 inches to two inches
- Stay-in-place guide keeps things steady and secure
- Use with both standard backsets and any latch bore face plate style
- Dimensions: 9.3 x 6.0 x 3.2 inches (WxHxD); weighs 12.0 ounces
- Includes a durable high carbon steel hole saw
See more technical details

"Door locks made easy" 2010-01-31
By Mark A. Koshmrl
I bought this so I could replace the door handles in my house. Most of them only had a one inch hole for the door knob. The Black and Decker installation kit took all the guess work out of re-doing my doors. Within one hour, I had 5 doors done. It worked great and it was a very resonable price. I highly recommend this to beginners and professionals alike.

"Decent tool if you know what you are doing" 2008-05-31
By H. Wu
I got this tool from one of the local home improvement store. Amazon's current price is better. In any case, it's cheaper than buying two separate bi-metal hole saws and a mandrel if you are working on only one brand of locks. Used it to install 3 deadbolts on metal doors. Worked just fine. Yes, the plastic guide is just marketing gimmick. Don't use it. Instead, drill a small pilot hole with a drill bit first BEFORE using this tool. Take your time to get it done accurately. And use a strong corded drill with a 1/2'' chuck and a 2nd handle.

Note that when changing the hole saw from the 2-1/8'' to the 1'' one, just remove the inner part of the mandrel, and leave the outer part on the 2-1/8'' saw. The previous reviewer apparently got confused by the instruction.

"Good luck using this thing" 2007-12-08
By T. Vasquez (Austin, TX USA)
I bought this kit to install some door locks and they're so cheap that they only give you ONE mandrel for two saw bits. The manual tells you to drill the 2 1/8" hole, then "disassemble 2 1/8" hole saw and assemble 1" hole saw". Yeah, good luck... once you drill with one of the saws, that mandrel stays in that saw bit and you won't be able to get it out even with your best wrenches. I'm stalled halfway into my door drilling and am returning this piece of Chinese made junk.

"Great for wood doors" 2006-04-27
By Jess Wright (Phoenix, MD)
I bought this jig and used it successfully with wood interior doors. It was simple I set the two plastic pieces for the right setback and tightened it onto the door. Drilled the holes and had a great result. I replaced 20 doors with no issues.

I tried using it for a metal door and the bit walked around on the metal. I ended up using the template that came with the lockset. I used a centerpunch and hand drilled it.

"Think of it as two slightly overpriced bi-metal hole saws." 2005-04-01
By veganMalcontent
This kit is really two bi-metal hole saws, an arbor, and some extra trash to throw out. I bought it to bore out the undersized holes on two metal-clad french doors. I hoped the flimsy plastic guide that comes with this kit would steady the hole saw. The first time I pulled the trigger on the drill, it was like that scene in the New York episode of the Simpsons where Homer uses a jackhammer to remove the boot on his car with comical results. To finish that door I ended up butting some clamps up against the guide to prevent it from moving. For the next door, I'll simply cut a hole in a piece of plywood and clamp the plywood to the door, which will make a much sturdier guide.

For a set of two bi-metal hole saws with an arbor, you can get better quality (DeWalt) for less money. Do yourself a favor and go buy DeWalt hole saws in the same sizes and make a jig similar to the one just described.

Images Product

Buy Black & Decker 79-368 Bi-Metal Door Lock Installation Kit Now

Anytime Tools 5 DIAMOND DUST HOLE SAW for TILE GLASS MARBLE

2010-04-27T06:06:00.001-07:00

Buy Cheap Anytime Tools 5 DIAMOND DUST HOLE SAW for TILE GLASS MARBLE

Buy Low Price From Here Now
The diamond coating on these saws give superior performance and life. Excellent results in glass, marble, slate, and tile. Nickel plated. Segmented design works better and lasts longer. Sizes (Shank diameter: 1/4"): 3/4" 1" 1-3/16" 1-3/8" 1-5/8" Note: To prolong the life of these bits, use on a low speed with coolant (water/oil)
Readmore

Technical Details

- Sizes: 1/4", 5/16", 3/8" 1/2", 1"
- Excellent results in glass, marble, slate, and tile.
- Segmented design works better and lasts longer.
- The diamond coating on these saws give superior performance and life.
- Note: To prolong the life of these bits, use on a low speed with coolant (water/oil)
See more technical details

"Fantastic" 2010-02-26
By A & B Lamps and Lighting
This was my first time to cut glass, and this product works great. I would recommend this to anyone.

"Works as advertised" 2009-01-11
By Larry E. Page (All over the USA (Fulltime RVer))
I purchased these drill its to make 1/2" holes in glass bricks & bottles so that my wife could put small Christmas lights inside as a holiday decoration. They work well but since there is no centering bit it would be very difficult to start a hole with a hand drill. fortunately I had access to a portable drill press so they worked quite easily. As a caveat, you should go slow with a minimum of pressure and be sure to use water to cool and lubricate as you drill.

"Diamond Dust Hole Saws" 2008-12-24
By Greg in Alaska (Eagle River, AK United States)
Great product for a good price. No problem drilling through tile. The smaller sizes (e.g., 1/4", 5/16", & 3/8") do not have any means of clearing the flute of debris, whereas other hole saws have openings for just such a purpose. This is the only reason I rate this product a 4 rather than 5; otherwise, a great product that I'd recommend to anyone who needs to drill through ceramic tile.

"Worked great on Granite countertop" 2008-11-11
By PJIV (Jackson, MS)
Bought the set to drill a hole in 3/4 thick granite countertop to install an undercounter water filter system. Was worried that I needed a much more expensive tool, but it worked like a charm, cutting the hole in less than five minutes of drilling. I kept the bit wet with a sprayer, and used the tip from another poster to clamp a board over the spot and use it as a drill guide.

Not sure whether I will need the rest of the bits, but is a nice tool to have handy in the future.

"Worked great" 2008-09-18
By Brett R. Cordell (Beaverton, OR United States)
I ordered these hole saws because I wanted to convert a Wine bottle into a lamp.

Unlike the other reviewers I used a wood clamp to hold the bottle on my Drill press. It is recommended to use them at 300 RPM, but my drill press only goes down to 500. I used a small water spritster to wet the area and occasionally add water to the cut. The hole saw worked well in this application.

The problem with using a hole saw without an Arbor is that it will "Wander" and not make a clean initial cut. Once the hole is started it is fine. That is why I used the clamp and drill press. I also wanted to save all of the labels on the bottle, so I minimized the amount of water used. I did also cover the labels with shrink wrap and masking tape to protect them from accidental water damage.

Images Product

Buy Anytime Tools 5 DIAMOND DUST HOLE SAW for TILE GLASS MARBLE Now

Milwaukee 49-22-4175 General Purpose Ice Hardened Hole Saw Kit, 15-Piece

2010-04-26T17:15:00.001-07:00

Buy Cheap Milwaukee 49-22-4175 General Purpose Ice Hardened Hole Saw Kit, 15-Piece

Buy Low Price From Here Now
Kit includes 11 cryogenically hardened hole saws in commonly used sizes. U.S.A. Saw Size (in.): 3/4in., 7/8in., 1in., 1 1/8in., 1 3/8in., 1 1/2in., 1 3/4in., 2in. 2 1/8in., 2 1/4in., 2 1/2in., Ice Hardened: Yes, Saw (qty.): 15
Readmore

Technical Details

"light duty use only - very expensive for regular use" 2010-02-13
By Michael Winters
We bought these initially for the trucks but quickly found that they were very expensive hole saws on a holes per dollar basis. Cut more than a couple holes in cement board or even MDF and these hole saws are toast - literally with the burn marks on the side of the hole saw. Cutting plywood or MDF or OSB and the material will start to smoke before you can finish the hole.

OK for mild steel and simple projects where time is not important and where you can use a cord drill. For cordless drills these bi-metal hole saws with their tiny high speed steel teeth quickly kill the charge in a battery. We can get 3-4 holes in wood even with 18v lithium-ion batteries.

Problem with all Milwaukee cases is that they don't provide room for adding more hole saw sizes to the kit. You have to buy a new kit and even then most cannot hold a 4-5/8" size needed for making holes for 4" pipe.

Much faster cutting and much longer battery life by using Blue Boar TCT tungsten carbide hole cutters for wood, plaster, composites, fiberglass, cement board and the like or even the Milwaukee Big Hawg hole cutters for wood.

BLUE BOAR TSF12 -12 Piece Tungsten Carbide TCT Self-Feed Hole Saw kit w/ 2-1/4" cutting depth, outperforms self-feed bits & bi-metal hole saws. Cut wood, MDF, OSB, laminates, Hardie & chipboard, plaster, drywall, brick, Formica

Maximum cutting depth is average, neither great nor terrible but it is something to consider if you want to buy tools for general use in lots of different situations. Not important for steel which is where the Milwaukee bi-metal hole saws are best used. "Ice hardening" is wonderful marketing hype but you still have high speed steel cutting tips which are marginal for most materials.

"Very Nice Set" 2009-04-06
By S. Crane (Tinley Park, IL)
I haven't used every size yet, but they all seem very sharp and the case is quite heavy-duty. The only thing I was let down about was the "case has space for more hole saws" part. There is a small storage space in the top of the case that can fit (3) 1-1/4ish hole saws. You CAN NOT fit any size larger that what is supplied in the case. I bought a 2-3/4" and 3" to finish the set off, but neither will fit in the case, but I didn't think it was fair to deduct a star for that. Overall I'm very satisfied with what I got for the price.

Images Product

Buy Milwaukee 49-22-4175 General Purpose Ice Hardened Hole Saw Kit, 15-Piece Now

Mirka 23-624-100 6" 6-Hole 100 Grit Dustless Hook & Loop Sanding Discs - 50 Pack

2010-04-26T05:40:00.001-07:00

Buy Cheap Mirka 23-624-100 6" 6-Hole 100 Grit Dustless Hook & Loop Sanding Discs - 50 Pack

Buy Low Price From Here Now
Mirka Abrasives INC 23-624-100 - Bulldog Gold - 6" 6-HOLE GRIP DISC 100 GRIT, 50/BX - Premium paper for finishing as well as heavy stock removal - Durable aluminum oxide grain delivers a fast, exceptionally long lasting cut - High strength resin bonded system - C & D-weight backings are 50% stronger than other premium brands using A-weight backings - Made with an anti-load stearate to provide increased life.
Readmore

Technical Details

- 6-hole dustless hook and loop sandpaper discs deliver fast and long-lasting results
- Designed to fit DeWalt DW443, Porter Cable 335, 97366, and Bosch 3727DVS
- Durable aluminum oxide and urea resin over glue bonds create a high performance sandpaper
- Includes 50 100-grit discs per box
- Each disc measures 6 inches in diameter
See more technical details

"Good value" 2009-12-13
By Pete B (Illinois, USA)
I bought these for my dad but have injoyed Mirka sanding disks for years.

Remodling contractor, Pete

"Good product" 2007-01-04
By Carlgo (Carmel Valley, CA)
The Mirkas were available both at Amazon and my local woodworking tool store, they fit my new Bosch 3727DVS (see review) and so I bought them.

How long they last depends on wise use. I think most people will need 50, 100, 220 and 320. That is $80! However, starting with 50 and working up saves time and makes the disks last much longer. Also, that progression creates very good results; flat, smooth and swirl-free (or very little).

The hook and loop design is great. I used to have sanders that required glue to attach the disks. This is soooo much better. Also, because the disks are so easy to change, you will be more likely to use the correct ones and this extends their life, makes for easier sanding, etc.

When you order disks, be sure you get the right ones! There is no standardization. There are different diameters and different numbers and configurations of holes for the vacuum function. Go out to the garage and double-check!

Make use of the vacuum system. I use a Fein with auto-start and the long 1.25 hose. Something like that will make your dreaded sanding routines much better.

Also, the vac not only cuts down on the dust almost completely (and it turns out that dust is very dangerous), but it sucks the sander down to the surface and that makes it easy to use.

All this costs a lot of money, of course. But, if you do a fair amount of wood work, there is no better or more pleasant way to get that sanding done.

I knocked off a star because I think they are expensive.

"Works Great" 2002-07-02
By Gregory S Brown (Richardson, TX United States)
Holds up longer than the home center variety. Works great on my Bosch 6".

Images Product

Buy Mirka 23-624-100 6" 6-Hole 100 Grit Dustless Hook & Loop Sanding Discs - 50 Pack Now

MK Morse M45P 7/16-Inch Boxed Hole Saw Arbor Fits AV20-AV96

2010-04-18T09:39:00.001-07:00

Buy Cheap MK Morse M45P 7/16-Inch Boxed Hole Saw Arbor Fits AV20-AV96

Buy Low Price From Here Now
Item #: 497-M45P.

Cutting Bit/Blade Mounting Cutting Overall Arbor Body Chuck Size = 1/2 in
Cutting Edge Follow Through = 1-1/2 - 6 in
Hole Shackle Shank Diameter = 7/16 in
Shank Type = Hex
Thread Size = 5/8 [Min], 18 [Max]
Used With = 1-1/4 - 6 in
Quantity = 1 per box

Customers also search for: Tools and Storage\Power Tools\Drilling and Fastening Tools\Hole Saws Discount 7/16" Hex Fits A20-a96, Buy 7/16" Hex Fits A20-a96, Wholesale 7/16" Hex Fits A20-a96, 050326140164, M45P, Hole Saw Tools
Readmore

Technical Details

- Sold Individually
See more technical details

"Not perfect but USA made" 2009-09-14
By A_G (CA United States)
This hole saw arbor isn't perfect, as there is noticeable wobble, but it is made in USA so that is a plus for me. I've found that all hole saws and arbors wobble, so for all practical purposes this seems to be as good as it will get for me. The shank on this arbor is hollow to allow the pilot drill to go through it, so be careful not to tighten it too much in your chuck or you can crack and break it. I did this with a Milwaukee arbor in my Jacobs "super duty ball bearing chuck" which can REALLY hold tight.

"surprisingly sloppy fit" 2009-05-09
By blekenbleu
.. even on their hole saw own blades.

I wonder whether another arbor (e.g. Dewalt's) would be more confidence-inspiring.

"It worked good." 2009-02-16
By F. Merz
This hole saw cut through an Ibeam, 1/4" thick. I had to make 4 cuts and several through wood. It cut through them all. The only issue, was the holes in the arbor did not exactly line up when it was tight. Overall I was impressed. I would buy other hole saws from Morse.

Images Product

Buy MK Morse M45P 7/16-Inch Boxed Hole Saw Arbor Fits AV20-AV96 Now

Milwaukee 49-22-4105 19-Piece Master Electricians Ice Hardened Hole Saw Kit

2010-04-18T00:13:00.003-07:00

Buy Cheap Milwaukee 49-22-4105 19-Piece Master Electricians Ice Hardened Hole Saw Kit

Buy Low Price From Here Now
Kit includes 19 cryogenically hardened hole saws in sizes often used by electricians. U.S.A. Professional Series: Yes, Saw Size (in.): 3/4in., 7/8in., 1 1/8in., 1 3/8in., 1 1/2in., 1 3/4in., 2in., 2 1/4in., 2 1/2in., 2 5/8in., 3in., 3 5/8in., 4 1/8in., 4 3/4in., Ice Hardened: Yes, Saw (qty.): 19
Readmore

Technical Details

"Good Buy" 2009-11-10
By P. Graves
Excellent hole saw kit for any tradesman. Sturdy, durable materials make this a well built kit. Bits are nice and sharp which makes for clean cut holes.

"I'm very impressed with this kit" 2009-11-05
By Paul N. Reeder
So far, I've used these saws to cut holes in plastic, drywall, and red oak. Minding speed for material being cut, the results have always been outstanding. I've had opportunity to chuck the saws in both a 18V cordless drill and a 16.5" drill press with no problems. This kit provides a great range of sizes and these guys stay sharp! Very nice case set up wisely which conserves room yet still makes each of the saws easily accessible. To sum it up, this "Made in the U.S.A." kit is a great deal for the money and I, personally, would buy it again in a heartbeat!

"Nice Assortment, great cut" 2009-06-08
By Mark (DFW area, TX)
I do a far share of electrical, plus other odd projects around house. This set has been great. The case even has room to fit a couple duplicate Hole Saws I had before buying a set.

With proper care and usage these blades hold up for a long life.

Images Product

Buy Milwaukee 49-22-4105 19-Piece Master Electricians Ice Hardened Hole Saw Kit Now

Mirka 23-624-060 6" 6-Hole 60 Grit Dustless Hook & Loop Sanding Discs - 50 Pack

2010-04-18T00:13:00.001-07:00

Buy Cheap Mirka 23-624-060 6" 6-Hole 60 Grit Dustless Hook & Loop Sanding Discs - 50 Pack

Buy Low Price From Here Now
Mirka Abrasives INC 23-624-060 - Bulldog Gold - 6" 6-HOLE GRIP DISC 60 GRIT, 50/BX - Premium paper for finishing as well as heavy stock removal - Durable aluminum oxide grain delivers a fast, exceptionally long lasting cut - High strength resin bonded system - C & D-weight backings are 50% stronger than other premium brands using A-weight backings - Made with an anti-load stearate to provide increased life.
Readmore

Technical Details

- 6-hole dustless hook and loop sanding discs deliver fast and long-lasting results
- Designed to fit DeWalt DW443, Porter Cable 335, 97366, and Bosch 3727DVS
- Durable aluminum oxide and urea resin over glue bonds create a high-performance sandpaper
- Includes 50 60-grit discs per box
- Each disc measures 6 inches in diameter
See more technical details

"cabinet maker" 2009-06-10
By glenn monroe (ct.)
The Mirka sand paper is a lower cost lower quality sand paper. The saying you pay for what you get is very true here. Some times you need a lower quality paper.

"you gotta send the right product" 2008-09-07
By Robert W. Good (CRESTED BUTTE,CO)
I live on top of a hill in Colorado, I do not have postal service. I use a friends house for delivery of on-line orders, it takes more than a hour of driving to pick up my order. Twice you sent me the wrong product, no-hole instead of 6 hole, very frustrating.

"horrible" 2008-09-01
By Michael J. Karman
I ordered this 6 holed dustless paperand it came with no holes, even after I sent itbackonceyou sent the same paper with no holes again. Totally useless.

"Better than the alternative..." 2007-04-02
By Mr. M (Bremerton, WA United States)
Free shipping got this to me in just a few days despite the longer estimates. For less than half the price per disk and double the wear life of my only alternative available at Home Depot, these babies were a major find! I ended up using a lot less than I had anticipated, and now I have a ton left for subsequent projects.

"Mirka sanding discs" 2005-08-07
By Stan Alexander (USA)
These discs were used with a Porter Cable sander. I used approximately 95 discs from this purchase restoring redwood decking. they did not clog or fill excessively and were extremely uniform in theri finish.

Images Product

Buy Mirka 23-624-060 6" 6-Hole 60 Grit Dustless Hook & Loop Sanding Discs - 50 Pack Now

Milwaukee 49-22-4185 28-Piece All Purpose Professional Ice Hardened Hole Saw Kit

2010-04-18T00:12:00.003-07:00

Buy Cheap Milwaukee 49-22-4185 28-Piece All Purpose Professional Ice Hardened Hole Saw Kit

Buy Low Price From Here Now
Kit includes 28 cryogenically hardened hole saws in commonly used sizes. U.S.A. Professional Series: Yes, Saw Size (in.): 3/4in., 7/8in., 1in., 1 1/8in., 1 1/4in., 1 3/8in., 1 1/2in., 1 3/4in., 2in., 2 1/8in., 2 1/4in., 2 1/2in., 2 5/8in., 3in., 3 1/4in., 3 3/8in., 3 5/8in., 3 3/4in., 4in., 4 1/8in., 4 1/4in., 4 1/2in., 4 3/4in., Ice Hardened: Yes, Saw (qty.): 28
Readmore

Technical Details

"AAfairy" 2010-02-07
By M. Davis (Salmon, Idaho)
I purchased this set for my husband for Christmas and he was thrilled. Not long after Christmas my husband needed to drill a hole in some heavy metal. Before it would have taken him forever, but he came and told me how fast he drilled the hole with one of these hole saw bits. He couldn't believe it and is thoroughly impressed. We are sold on Milwaukee products anyway, and this is just one more example of a great product. I also feel I got a good deal on Amazon. That is where I have purchased all of my Milwaukee gifts for him. Hard to beat Amazon's price and free shipping, I have tried.

"Wish I had this set long ago" 2009-11-02
By W. Lowe
I've owned a few of those smaller sets and while helpful, I never seemed to have the size I needed. Ended up drilling a hole too big or too small and having to enlarge it. With this set, I always have the size I need, all the way up to 4-3/4". There's a good chance that I will never use several sizes in the set, but I know that if I need it, it's there.

The hole saws are very sharp and stay sharp, compared to others I've owned from Bosch, Dewalt, Lenox and Ace Hardware. It comes with extra pilot bits which is a plus. Also, really like the plastic case, everything fits well and stays in place.

I would definitely but this set again, but have a feeling I won't have to. I'll just replace dull hole saws as necessary.

"Milwaukee 28 piece All Purpose Hole Saw Kit" 2009-10-02
By Sticks (Veedersburg, Indiana)
I ordered this kit due to needing a couple different sized hole saw cutters to put in some dead bolts. I had purchased Milwaukee cutters prior to this but just purchased the individual cutter for the job at hand. I did decide to buy the 28 piece kit because I liked the idea of having all my cutters in 1 easy container to carry to a job and believe this kit will contain every cutter I will ever need. It does. It has every cutter size I needed and probably ever will need. The container is well built and appealing. I didn't know how the drive system to the cutters had changed since I purchased my last individual cutter. The new system has threads in the base of the cutter with 2 pins that are threaded into the cutter from the drive shaft that holds the drill bit. This is the best system I've seen. I also believe these cutters will take many cuts through metal or wood before beginning to dull. Its a lot of money but its probably the last hole saw kit you will ever need unless you use them daily. I'm very satisfied with this kit.

"Great Saws, Great collection and very good price" 2009-08-20
By WMG (Chicago, IL)
I needed a 4 3/4" hole saw for a floor outlet box. I needed a 2 1/8" hole saw for a lockset. Found both sizes and many more in this collection.

Both times that I have used these saws, I was impressed.

For the money, I did not find a better selection of sizes.

Both large and small chucks are included and the case organizes things wonderfully.

I don't believe that anyone with a need for multiple sizes would be disappointed in this set.

"fantastic value" 2008-09-14
By G. Robidoux
Amazon shipped my product as promised. The quality of the Milwaukee hole saw kit is top quality. I will definetely order more products from Amazon in the future.

Images Product

Buy Milwaukee 49-22-4185 28-Piece All Purpose Professional Ice Hardened Hole Saw Kit Now

Mirka 23-614-120 5" 5-Hole 120 Grit Dustless Hook & Loop Sanding Discs - 50 Pack

2010-04-18T00:12:00.001-07:00

Buy Cheap Mirka 23-614-120 5" 5-Hole 120 Grit Dustless Hook & Loop Sanding Discs - 50 Pack

Buy Low Price From Here Now
Mirka Abrasives INC 23-614-120 - Bulldog Gold - 120G 5" 5-HOLE GRIP DISC 50/BX - Premium paper for finishing as well as heavy stock removal - Durable aluminum oxide grain delivers a fast, exceptionally long lasting cut - High strength resin bonded system - C & D-weight backings are 50% stronger than other premium brands using A-weight backings - Made with an anti-load stearate to provide increased life.
Readmore

Technical Details

- Durable aluminum oxide grain
- High-strength resin bond system
- Increased life, made with antiload stearate
- Fits Porter-Cable 97355 and 333
- 50 per box
See more technical details

"Always have extra" 2010-04-09
By C. Murphree (Salem, MA)
small packages run out quicker - - then, you have to STOP what you are doing, GO to the store, and BUY MORE.

"Great Product" 2009-09-12
By J. Schwitters (Knoxville, TN United States)
We use these daily for all of our finish woodworking. Packed in a durable box and good price. Mirka always put out a great product.

"Good sandpaper for hardwoods" 2008-10-14
By Robert A. Blaney (DOVER, DE USA)
I have been using this Mirka sandpaper (grits from 80 to 220)on my Porter Cable sander for about six years. I build fine furniture and find that the Mirka paper holds up well on cherry and walnut. It cuts fast and seems to last a fairly long time (a few hours of sanding time). When it does wear out I typically keep a few sheets around to use as a "finer" grit or to do hand sanding. I have not had any sheets disintegrate. It also holds well to the hook and loop on my P-C.

"Good value for $" 2007-01-04
By J. Wong (Ohio)
Bought a box of this to go with my PC 343 sander. Don't make the same mistake as I did. The PC 343 is 8 hole. This sandpaper is 5 hole!

But other than my mistake in ordering it, I have used it with the PC343 and it sands and sands and sands! The paper is heavyweight and last a lot longer than what I was using with my C-backed 3M sander. Picks up dust reasonably well considering I am only using approx 2 or 3 out of the 5 holes. Probably the best sand paper I have used in a long time.

Price is alright if you are buying just one box. I have found suppliers selling it for $16 for all grits. If plan on getting several boxes or the higher grits, it is available from other online suppliers for $16 a box (Plus $6 shipping). Just do some surfing, you may get better deals from time to time with store promotions.

"Tops" 2005-09-09
By R. Gerdes (San Jose, CA United States)
Works great on my Porter Cable 333. Not a failure in the box. High quality

Images Product

Buy Mirka 23-614-120 5" 5-Hole 120 Grit Dustless Hook & Loop Sanding Discs - 50 Pack Now

Kreg Multi-Purpose Push Stick

2010-04-17T19:42:00.001-07:00

Buy Cheap Kreg Multi-Purpose Push Stick

Buy Low Price From Here Now
The Kreg Multi-Purpose Push Stick adds more than just safety to your woodshop. With features such as a built-in storage magnet, pencil holder, and removable locking depth gauge, the Multi-Purpose Push Stick adds true speed and convenience to every cut you make!
Readmore

Technical Details

- Ergonomic Easy-Grip Handle
- Built-In Locking Depth Gauge
- Built-In Pencil Holder
- Powerful Magnet Lets You Store Push Stick Almost Anywhere
- Constructed from Durable Impact Resistant Plastic
See more technical details

"Works good" 2010-03-07
By W. R. Redmond (usa)
Works fine. Should have a deeper lip as it sometimes slips off the board

"I'm very happy with this purchase.." 2009-12-22
By Michael M (Baltimore, MD)
Everything I was expecting in a push stick...and more. This push stick has a lot of nice features. I was considering making my own, but for the price of the Kreg Multi-purpose push stick w/ all of the added features (the ruler is great for determining blade height and the pencil holder in the handle is surprisingly handy) there was really no choice to make. Really the choice came down to either pay a nominal price for the kreg which has a lot of nice features and capabilities or spend an hour or two of my time to make something with fewer features and less capabilities for slightly less money (don't forget material costs). Like is said no choice to make. Kudos to whoever designed this!!

"Handy Device at a great price" 2009-06-23
By Maddog (Colorado)
I have used this a few times and I like it very much. It has a short reach, but that makes it nice for smaller jobs. It holds a pencil and has a nice rule included for setting the blade height or whatever. I also love the magnet that keeps it close and handy so it doesn't get lost !!

"Kreg Multi-Purpose Push Stick" 2009-04-15
By Gary T. Gaba
Good idea - Bad Design! The "Lip" for pushing against the wood could be a little bigger; only extends down 1/4 inch allowing the potential of slipping up over the stock being pushed through. 1/2 inch would be more practical and safer.

Images Product

Buy Kreg Multi-Purpose Push Stick Now

Mirka 23-624-150 6" 6-Hole 150 Grit Dustless Hook & Loop Sanding Discs - 50 Pack

2010-04-17T09:47:00.001-07:00

Buy Cheap Mirka 23-624-150 6" 6-Hole 150 Grit Dustless Hook & Loop Sanding Discs - 50 Pack

Buy Low Price From Here Now
The Mirka Hook & Loop sanding discs come on a B weight backing, giving the disc better edge wear & wear ability. The Stearate aluminum oxide grit provides a fast, uniform cut. We stock these discs in 5 hole & 8 hole in the 5" size and 6 hole 6" size. This will cover the most popular sanders on the market. These discs can also be used with a standard pad with no punched holes. (Each size and/or grit sold separately)
Readmore

Technical Details

- 6-hole dustless hook and loop sandpaper discs deliver fast and long-lasting results
- Designed to fit DeWalt DW443, Porter Cable 335, 97366, and Bosch 3727DVS
- Durable aluminum oxide and urea resin over glue bonds create a high performance sandpaper
- Includes 50 150-grit discs per box
- Each disc measures 6 inches in diameter
See more technical details

"Mirka 6-Hole Hook and Loop Sanding Discs" 2009-09-12
By Eugene Fischer (Colorado)
Mirka discs are excellent quality. I use them on my Bosch orbital sander and find that they last a long time and do not tear easily.

"Great paper, It is a bargain considering how long it lasts" 2003-06-12
By Bob Feeser (Springfield, PA USA)
When I first bought my Bosch 3727DVS, I bought a box of the popular grades; 80, 100, 120, 150, 180, 220, and 320. The 100, 120, and 150 are the most frequently used.To tell you the truth, I rarely use the 320. I just went through over 50 boards of 80+ inch cedar, in three grades, and I only used about 10 sheets all combined. That is about 3 for each grade. The advantage to quality paper, is that you can get in a groove with some consistency. Instead of having cheaper paper that gives you the new disc agressiveness, then quickly to the used paper smoothness, which may be a grade finer, and miss the deeper lines from the coarser grade of paper in the previous step. Additionally the backing paper is stiff enough to do the job. That way you don't wind up with a buggered edge on your sander. The 6 hole paper is nice for the dust free environment. I simply attach a 2 1/2" vac hose to the dust port on my Bosch, which is way smaller than that, so a lot of air escapes. The vacuum draw that leaks around the inlet, sucks up that last 1% of the dust coming off the paper. It is still recommended to wear a mask because the shop vacs only capture to a micron or so. So technically you have a vac system that is actually a mini-part of a micron, invisible dust manufacturing plant. Over time, even that is a consideration. A good respirator, not a paper mask is advisable. A fresh air system is even better.
I had a body shop for 20 years, and after using the cheaper paper on the random orbit sanders, and winding up with a floor full of used paper, I can attest to the savings of using quality, aluminum oxide paper. It is actually cheaper, in addition to doing a better job. Highly recommended.

"Works Great" 2002-07-02
By Gregory S Brown (Richardson, TX United States)
Holds up longer than the home center variety. Works great on my Bosch 6".

"Great sanding disks" 2000-06-20
By
These pads are the best I have used at any price, velcro doesn't wear, bite is aggressive, and the paper is strong.

Images Product

Buy Mirka 23-624-150 6" 6-Hole 150 Grit Dustless Hook & Loop Sanding Discs - 50 Pack Now

6 PACK 120G ZIP REFILL

2010-04-16T23:32:00.001-07:00

Buy Cheap 6 PACK 120G ZIP REFILL

Buy Low Price From Here Now
6 pack of sandpaper refills for the Gater Zip hand sander (model No. 7186). No. 341630: Assortment pack (2 each of 80, 120, and 220 grit) No. 341614: 80 grit No. 351623: 120 grit No. 341605: 220 grit
Readmore

Technical Details

See more technical details

Images Product

Buy 6 PACK 120G ZIP REFILL Now

6 PACK 220G ZIP REFILL

2010-04-16T14:31:00.001-07:00

Buy Cheap 6 PACK 220G ZIP REFILL

Buy Low Price From Here Now
6 pack of sandpaper refills for the Gater Zip hand sander (model No. 7186). No. 341630: Assortment pack (2 each of 80, 120, and 220 grit) No. 341614: 80 grit No. 351623: 120 grit No. 341605: 220 grit
Readmore

Technical Details

See more technical details

Images Product

Buy 6 PACK 220G ZIP REFILL Now

Mirka 23-615-180 5" 8-Hole 180 Grit Dustless Hook & Loop Sanding Discs - 50 Pack

2010-04-16T03:44:00.001-07:00

Buy Cheap Mirka 23-615-180 5" 8-Hole 180 Grit Dustless Hook & Loop Sanding Discs - 50 Pack

Buy Low Price From Here Now
Mirka Abrasives INC 23-615-180 - 180G - Bulldog Gold - 5" 8-HOLE GRIP DISC 50/BX - Premium paper for finishing as well as heavy stock removal - Durable aluminum oxide grain delivers a fast, exceptionally long lasting cut - High strength resin bonded system - C & D-weight backings are 50% stronger than other premium brands using A-weight backings - Made with an anti-load stearate to provide increased life.
Readmore

Technical Details

- Sanding discs have a special sharp, durable aluminum oxide grain
- 5 inch 8-hole dustless hook & loop
- Fits: DeWalt DW421, DW423, and 5 in. Ryobi & Bosch 3107, 3725
- 50 in a box
- Grit - 180
See more technical details

"Best I found yet" 2010-02-11
By Scott Carpenter
These were purchased for my Bosch orbital sander. They work great, especially if one remembers to start and stop the sander when it is on the wood. Otherwise it could come flying off after some use; but when used diligently as directed, works great. So much better than anything I found at the Big Box stores, who never really have a wide selection of anything decent.

"Good stuff!" 2010-02-05
By James Whitacre (Casey, Il. USA)
Pleased so far--not the heaviest paper but seems to give good service for the price. Use more sheets than discs with heavier backing paper, but I tend to try to keep using those too long after the grit is worn out.

"Wow" 2009-12-11
By Lucas A. Miller (East Coast)
For my random orbital sander. About 1/5 the price on Amazon in this quantity then buying them in 5 packs at Lowes/HD.

"Great packaging for larger jobs" 2009-02-15
By Thomas Ritch (Gilbert, AZ)
I just finished a 700 sq. ft. tongue 'n groove ceiling project, and used multiple boxes/grits of the Mirka product. Much cheaper than the typical DIY home store pricing, and if you have a large project like I did, you'll save big bucks. These are high quality disks that get the job done.

"See ya later" 2008-09-07
By D. McMenamin (West Palm Beach, FL.)
I bought three different grits and have used two of them. I feel the abrasive on the disk wears off to soon. They're cheap enough but you'll use twice as many. I expected more from a product made in Finland. The ones from Home Depot (Norton brand I think )last longer.

Images Product

Buy Mirka 23-615-180 5" 8-Hole 180 Grit Dustless Hook & Loop Sanding Discs - 50 Pack Now

EazyPower 6" Hole Saw for CornHole Boards with Free Cornhole Board Plans

2010-04-15T18:52:00.001-07:00

Buy Cheap EazyPower 6" Hole Saw for CornHole Boards with Free Cornhole Board Plans

Buy Low Price From Here Now
This is an EazyPower 6" Hole Saw- Perfect for making holes in Cornhole Boards. Also great for duct work, AC/Heat registers, ceiling lights, and speakers. Works with 3/8" or 1/2" drills.
Readmore

Technical Details

- Made of Heat Treated Carbon Steel Alloy
- Will provide smooth, even professional cutting
- For wood, soft metals, drywall, plastics, ceiling tiles
See more technical details

"Struggled with fiberglass" 2010-04-12
By J. Fox
Purchased to make 2 holes for speaker install on boat. Material was 3/4" thick, fiberglass on top of marine grade plywood. It took 20 minutes to get a third of the way through using a 3/8" drill (couldn't apply much pressure). It made a nice groove in the fiberglass, ended up using a jig saw to cut through the rest of the way (repeated the process for the second speaker). My guess is that I would have had trouble with most hole saws, just be mindful if material your drilling through is dense (think about using a more powerful drill and upgraded hole saw).

"Ok for light use but expensive and limiting otherwise" 2010-04-01
By Peter Mitchell
Good hole saw for light use in a drill press if used with care. Hole saws that have a band with lots of little teeth have so much side wall area touching the wood while cutting that the friction burns the wood and takes a lot of the drill's available power and turns it into heat.

For a single 6" diameter hole the Eazypower hole saw is not a bad choice. But the Hole Pro HH-200 and HH-300 twin blade hole cutters for wood require about a forth as much drill power and cut faster than this Eazypower 6" hole saw. The Hole Pro H-200 (2" to 8" range) and HH-300 (2" to 12" model) twin blade hole cutters adjust so the hole can be any size from 2" up to 12" in diameter with one hole cutter taking the place of a dozen hole saws and making it possible to cut hole sizes that are not made in hole saws.

If you plan on cutting a lot of holes the Hole Pro HH-200 and HH-300 have replaceable blades at $11.95 a pair. I get over 100 holes in 3/4" birch plywood per set. They also make a clean edge cut in thick plaster and rubber and the tungsten carbide version (17.95) a pair are super for cutting MDF.

HOLE PRO BH-002: High Speed Steel (HSS) Blade Set

For truly heavy duty production situations the Hole Pro X models have a heavier bar and a different blade holder but use the same replaceable high speed steel and tungsten carbide blades. They have one model, the X-425 that cuts holes up to 17 inches in diameter and I have used it to make speaker enclosures for 14 and 15 inch diameter woofer speakers.

The X-230 production kit includes a clear shield that controls the dust though you can use the tool without it. I like the ball bearing mounted shield as it makes it easy to cut 4x8 sheets of wood without having to first cut it down into smaller pieces to place in the drill press. I get more holes per sheet of material this way and save about 40% on material costs.

With the shield the radius is 7" but that amount of swing is common with most drill presses.

Hole Pro X-230 Kit: 1-7/8" to 9" Infinitely Adjustable Twin Blade Hole Saw Cutter 3" 4" 5" 6" 7" 8" 9" Hole Wood Sheetrock Plaster Fiberglass Plastic MDF Cement Board. Use ¼ Torque of Hole Saw to Cut Twice As Fast

With the Hole Pro shield I can limit how deep the hole cutter cuts and for making holes in ceilings and not hitting a wire or bit of plumbing this provides peace of mind. The shield catches all the dust and cuttings so cleaning up is a breeze.

"purchase" 2010-02-15
By Bradley Guetzke
This is the first time I had ordered from Amazon and everything went fine and was shipped fairly quickly.And no damage.I have not used this item yet but it looks sturdy.That is why I did not rate this any higher but gave it a average rating.

"great product" 2010-02-12
By C. gridley (Detroit,MI)
The holesaw was very well done, heavy metal, easy to put together and did the job with no problems.I would highly recomend this product,the price was right, it did the job and it was shipped fast.

"no problems came fast worked great" 2009-12-30
By Sharon Mathisen
no problems came fast worked great Eazypower 6 inch hole saw for wood drywall tiles

Images Product

Buy EazyPower 6" Hole Saw for CornHole Boards with Free Cornhole Board Plans Now

Mirka 23-614-AP 5" 5-Hole Assorted Grits (10 Each Of 80/100/120/150/220) Dustless Hook & Loop Sanding Discs

2010-04-15T08:50:00.001-07:00

Buy Cheap Mirka 23-614-AP 5" 5-Hole Assorted Grits (10 Each Of 80/100/120/150/220) Dustless Hook & Loop Sanding Discs

Buy Low Price From Here Now

Readmore

Technical Details

- Durable aluminum oxide grain
- High-strength resin bond system
- Increased life, made with antiload stearate
- Fits Porter-Cable 97355 and 333
- 50 per box, 10 pieces each of 80, 100, 120, 150 and 220 grits
See more technical details

"Great Product! How can they sell so many for so cheap?" 2010-02-24
By Bill (Vacaville, CA)
I just got a new hook and loop sand disc that I needed to purchase sandpaper for. I saw these Mirka assorted grit sandpaper on Amazon. There are five different grits that come in this package, 10 of each grit. For the price I could not turn them down. A pack of 50 for less than $18, compared to buying 2-3 disc for $3-$5 at a local store. The sandpaper disc stuck very well to my sanding disc. I have only done a little sanding so far, but I am pleased with the results. I was sanding metal and I started off with the 80 grit and it brought the metal down quickly, I worked my way up to the 220 grit to help polish out the metal. Soon I will be using them on a wood project and I think I will be happy with the results. Again for I still can't believe how many I get for such a low price, I guess you get a good discount when buying in bulk, and having 5 different grits definitely allows for a lot of different uses. Would buy again.

"The best" 2010-01-09
By Robert M. Koretsky (Portland, OR USA)
I bought this assortment pack, and 50 disk packs of every grit in the assortment, and it's the best sandpaper I've ever used! I joint together wood quite frequently, and the tiny imperfections and ridges at the joint line were once challenging to remove; I didn't want to buy a $1000 or more drum sander just to speed up the job. Now, with these sanding disks and a $100 Porter-Cable hand sander, my finishing work looks professional.

The disks are on A,B, and C grade thick paper, depending on the grit, and they are very durable and last as long as I think they should.

This is an excellent product, buy it if you want the best!

"Great way to sand anything" 2006-08-02
By Wayne Tafuro (Paris, TN USA)
This is great sand paper, well bonded and lasts a long time. The box I purchased will probably last for a couple of years. I'm using a Porter Cable sander and the paper never slips on the mount.

"Sandpaper review" 2006-02-26
By Karen K. Ramsey (Mammoth Lakes, CA United States)
The hardware stores all sell packages of the same grit. Getting a large assortment pack of paper was great. I also like that it has 5 holes like my sander. A lot of paper has a bunch of holes to fit multiple sanders. Mirka sandpaper always lasts longer than others.

"Stays put and holds up" 2005-09-13
By Daniel J. Scheuer
This paper works great on my Porter Cable sander; it stays put, and it really holds up to a lot of use. Like others, I find myself changing grit before the paper wears out, so I end up with a stack of still useable paper. Good paper, good price.

Images Product

Buy Mirka 23-614-AP 5" 5-Hole Assorted Grits (10 Each Of 80/100/120/150/220) Dustless Hook & Loop Sanding Discs Now

Mirka 23-615-060 Bulldog Gold 5-Inch 8-Hole 60 Grit Grip Vacuum Discs, 50-pack

2010-04-14T23:39:00.001-07:00

Buy Cheap Mirka 23-615-060 Bulldog Gold 5-Inch 8-Hole 60 Grit Grip Vacuum Discs, 50-pack

Buy Low Price From Here Now
Mirka Abrasives INC 23-615-060 - Bulldog Gold - 60G 5" 8-HOLE GRIP DISC 50/BX - Premium paper for finishing as well as heavy stock removal - Durable aluminum oxide grain delivers a fast, exceptionally long lasting cut - High strength resin bonded system - C & D-weight backings are 50% stronger than other premium brands using A-weight backings - Made with an anti-load stearate to provide increased life.
Readmore

Technical Details

- 5-inch 8-hole 60-grit grip vacuum discs provide a fast and exceptionally long-lasting cut
- Made with anti-load stearate to provide increased life
- Durable aluminum oxide grain
- Includes 50 discs
- Fits DeWalt DW421 and DW423; 5-inch Ryobi and Bosch 3107, 3725
See more technical details

"Great Value" 2010-02-17
By Luther Leonard (Jakarta Indonesia)
Just what I needed in Jakarta Indonesia and was unable to buy them on the local market so this saved the day and I got them in 7 days.

"The best fit found yet" 2010-02-11
By Scott Carpenter
These were purchased for my Bosch orbital sander. They work great, especially if one remembers to start and stop the sander when it is on the wood. Otherwise it could come flying off after some use; but when used diligently as directed, works great. So much better than anything I found at the Big Box stores, who never really have a wide selection of anything decent.

"Plan to throw it out fast" 2009-10-01
By L. Schrader
This paper did not last long compared to the gator brand at Lowe's. Plan to trow it out fast, it does not last long and seems thin, and I think it wears out my sanding pad faster, I had to return it and after paying for shipping back, I'm still glad I got rid of it.

"Great value, gets the job done." 2009-04-22
By Aaron Dahl (San Antonio, TX)
I'm happy with these. I bought these Mirka discs 50 pack each of the 60, 120, and 180 grit. I do a good bit of woodworking, and these seem to hold up well and vent properly.

"Great Value" 2007-09-11
By J. Kulaga (Madison, WI USA)
I took a chance and tried this product. I was pleasantly surprised at how long they lasted, comparable to the much more expensive brands.

Images Product

Buy Mirka 23-615-060 Bulldog Gold 5-Inch 8-Hole 60 Grit Grip Vacuum Discs, 50-pack Now

Mirka 23-624-220 6" 6-Hole 220 Grit Dustless Hook & Loop Sanding Discs - 50 Pack

2010-04-11T09:12:00.001-07:00

Buy Cheap Mirka 23-624-220 6" 6-Hole 220 Grit Dustless Hook & Loop Sanding Discs - 50 Pack

Buy Low Price From Here Now
The Mirka Hook & Loop sanding discs come on a B weight backing, giving the disc better edge wear & wear ability. The Stearate aluminum oxide grit provides a fast, uniform cut. We stock these discs in 5 hole & 8 hole in the 5" size and 6 hole 6" size. This will cover the most popular sanders on the market. These discs can also be used with a standard pad with no punched holes. (Each size and/or grit sold separately)
Readmore

Technical Details

- Sanding discs have a special sharp, durable aluminum oxide grain
- 6 inch 6-hole dustless hook & loop
- Fits: DeWalt DW443, Porter Cable 335, 97366, and Bosch 3727DVS
- 50 in a box
- Grit - 220
See more technical details

"5 stars for product, 0 star for amazon" 2005-06-28
By Sang Joon Im (Las Vegas, NV USA)
Usually ships within 24 hours (Oh yeah...) That's what amazon said when I purchased it. It's been over a month and they replied with this and that excuses. Come on! I'll go and pick it up if you allow me.

"Very fine, for your best projects, lasts long" 2003-06-12
By Bob Feeser (Springfield, PA USA)
When I first bought my Bosch 3727DVS, I bought a box of the popular grades; 80, 100, 120, 150, 180, 220, and 320. The 100, 120, and 150 are the most frequently used.To tell you the truth, I rarely use the 320. Local home centers sell the 5" variety, so if you are enjoying the additional cutting surface of a 6 inch, this is one of the best places to stock up.
I just went through over 50 boards of 80+ inch cedar, in three grades, and I only used about 10 sheets all combined. That is about 3 for each grade. The advantage to quality paper, is that you can get in a groove with some consistency. Instead of having cheaper paper that gives you the new disc agressiveness, then quickly to the used paper smoothness, which may be a grade finer, and miss the deeper lines from the coarser grade of paper in the previous step. Additionally the backing paper is stiff enough to do the job. That way you don't wind up with a buggered edge on your sander. The 6 hole paper is nice for the dust free environment. I simply attach a 2 1/2" vac hose to the dust port on my Bosch, which is way smaller than that, so a lot of air escapes. The vacuum draw that leaks around the inlet, sucks up that last 1% of the dust coming off the paper. It is still recommended to wear a mask because the shop vacs only capture to a micron or so. So technically you have a vac system that is actually a mini-part of a micron, invisible dust manufacturing plant. Over time, even that is a consideration. A good respirator, not a paper mask is advisable. A fresh air system is even better.
I had a body shop for 20 years, and after using the cheaper paper on the random orbit sanders, and winding up with a floor full of used paper, I can attest to the savings of using quality, aluminum oxide paper. It is actually cheaper, in addition to doing a better job. Highly recommended.

Images Product

Buy Mirka 23-624-220 6" 6-Hole 220 Grit Dustless Hook & Loop Sanding Discs - 50 Pack Now

Neiko Pro-Grade 5-Piece Diamond Dust Hole Saw, Tile Glass Marble Slate Tool - 3/4", 1", 1 3/16", 1 3/8", 1 5/8"

2010-04-10T22:28:00.001-07:00

Buy Cheap Neiko Pro-Grade 5-Piece Diamond Dust Hole Saw, Tile Glass Marble Slate Tool - 3/4", 1", 1 3/16", 1 3/8", 1 5/8"

Buy Low Price From Here Now
5pc Diamond Dust Hole Saw, Shank: 1/4" *Sizes: 3/4", 1", 1 3/16", 1 3/8", 1 5/8" *Excellent Results in Glass, Marble, Slate, and Tile
Readmore

Technical Details

- 5 Popular Sizes
- 1/4 Inch Shank
- Diamond dust coating for superior performance on multiple mediums
See more technical details

"They do Work" 2010-03-03
By Guillemo Ciudad Real (ORLANDO, FLORIDA United States)
They do their job. I already made about 18 holes in a 5mm glass.. thy work ok.

"Granite drilling" 2010-02-17
By Jan Kolodziej (MA)
This product met my expectations and did the job and fast. It was granite countertop drilling, two holes 1.625 diameter for sink and faucet installation. The quality of the blades is decent although I would not call it professional. However for "advanced" and trifty handyman it was just perfect. The holesaw was a. guided by template, b. driven by cordless drill at about 1,200 RPM, c. light pressure was applied and d. lot of water was used during drilling. Drilling through about 1" countertop took about 2 minutes. The weight of the countertop was supported on three points, one, hardwood plank just under the hole. No chipping!

"Good Job" 2009-12-06
By S. Glover
Price was reasonable, delivered quickly, bought for one specific project and have used for two additional projects. Worked great, a nice addition to my tool collection.

"solid product - no arbor" 2008-06-19
By James Long (Richmond, VA)
I used this hole saw kit to drill holes in a granite counter top. It worked well, but I was a little surprised when I realized that the hole saws don't have an arbor or drill bit in the middle to help align them and keep them drilling straight. As I was unable to get my large piece of granite up on a drill press, I first used the bit to drill a hole in a piece of wood then clamped that piece of wood to my counter top as a guide. I then filled the hole with water to cool the hole saw and I was able to drill down through the granite with a hand drill. It worked well, but I was expecting the saws to have a center shaft that would keep the bit centered on a pilot hole. Of course it would have been harder to keep the cooling water against the cutting surface if the bit had had a center arbor.

Images Product

Buy Neiko Pro-Grade 5-Piece Diamond Dust Hole Saw, Tile Glass Marble Slate Tool - 3/4", 1", 1 3/16", 1 3/8", 1 5/8" Now

Mirka 23-624-080 6-Inch 6-Hole 80 Grit Dustless Hook and Loop Sanding Discs, 50 Pack

2010-04-10T11:54:00.001-07:00

Buy Cheap Mirka 23-624-080 6-Inch 6-Hole 80 Grit Dustless Hook and Loop Sanding Discs, 50 Pack

Buy Low Price From Here Now
Mirka Abrasives INC 23-624-080 - Bulldog Gold - 6" 6-HOLE GRIP DISC 80 GRIT, 50/BX - Premium paper for finishing as well as heavy stock removal - Durable aluminum oxide grain delivers a fast, exceptionally long lasting cut - High strength resin bonded system - C & D-weight backings are 50% stronger than other premium brands using A-weight backings - Made with an anti-load stearate to provide increased life.
Readmore

Technical Details

- Durable aluminum oxide grain
- High-strength resin bond system
- Increased life, made with antiload stearate
- 80 Grit
- 50 per box
See more technical details

"Mirka sanding discs" 2009-06-08
By R. Borgen (Boston, MA USA)
I bought the Mirka 80 grit sanding disks based on the reviews I read. I must say they exceeded my expectations, they are the longest lasting discs that I have ever used.

"Watch the dust fly" 2009-05-06
By Bunker (Seneca, SC USA)
Fast delivery, great sanding discs, great price. Best quality I can find; I get my work done faster.

"Mirka 6" 6-hole 80 grit sanding disk" 2008-09-08
By D. Hunt
I ordered an assortment of Mirka sanding disks (different grit) for my Porter Cable 6 inch random orbit sander.

The 80 grit was suppose to be 6 inch / 6-hole but has no holes.

I tried to access the web site to initiate a return or replacement.

The web site would not recognize my order number.

After several tries I gave up.

"Awesone va!ue!" 2007-01-11
By Joanne M. Martell (Suncook, NH United States)
These are of very good quality and much more affordable than buying a package of 5 at home improvement stores!

Images Product

Buy Mirka 23-624-080 6-Inch 6-Hole 80 Grit Dustless Hook and Loop Sanding Discs, 50 Pack Now

Mirka 23-615-320 5" 8-Hole 320 Grit Dustless Hook & Loop Sanding Discs - 50 Pack

2010-04-09T23:46:00.001-07:00

Buy Cheap Mirka 23-615-320 5" 8-Hole 320 Grit Dustless Hook & Loop Sanding Discs - 50 Pack

Buy Low Price From Here Now
Mirka Abrasives INC 23-615-320 - 320G - Bulldog Gold - 5" 8-HOLE GRIP DISC 50/BX - Premium paper for finishing as well as heavy stock removal - Durable aluminum oxide grain delivers a fast, exceptionally long lasting cut - High strength resin bonded system - C & D-weight backings are 50% stronger than other premium brands using A-weight backings - Made with an anti-load stearate to provide increased life.
Readmore

Technical Details

"Great product" 2010-03-26
By Richard M. Vercoe (Clochester, Vermont United States)
These sanding disks have always performed very well for me. They last as long as some of the more expensive disks and cut just as well.

"Very useful" 2010-01-31
By Roger P. Grimshaw
Used them for the first time today and am happy. Seemed like good value and shipping was fast and efficient. The hook and loop fastening seemed very secure but it was still easy to change grits. It was nice to get all these grits in one package so I can decide what I'll need in the future for my new sander. You can't go wrong here.

"Mirka sanding disks" 2009-09-14
By G. A. Harker (Jackson, WY)
all the different grits I've tried from Mirka have been good and even wearing with good adhesion to the hook and loop.

"Very good quality" 2009-01-31
By M. Sell (Bangor,Mi.)
I have found that the quality of all the Mirka 5 in., 8 hole sanding disk to be very good,holding up well for a good amount of sanding.

"love the mirkas" 2009-01-22
By A. Mandeville (Connecticut)
have switched all our sanders to mirka paper and have really been happy with the results...the 320 is the last level of finish before you stain or btween coats on clear finishes.

Images Product

Buy Mirka 23-615-320 5" 8-Hole 320 Grit Dustless Hook & Loop Sanding Discs - 50 Pack Now

Mirka 23-624-120 6" 6-Hole 120 Grit Dustless Hook & Loop Sanding Discs - 50 Pack

2010-04-08T20:26:00.001-07:00

Buy Cheap Mirka 23-624-120 6" 6-Hole 120 Grit Dustless Hook & Loop Sanding Discs - 50 Pack

Buy Low Price From Here Now
Mirka Abrasives INC 23-624-120 - Bulldog Gold - 6" 6-HOLE GRIP DISC 120 GRIT, 50/BX - Premium paper for finishing as well as heavy stock removal - Durable aluminum oxide grain delivers a fast, exceptionally long lasting cut - High strength resin bonded system - C & D-weight backings are 50% stronger than other premium brands using A-weight backings - Made with an anti-load stearate to provide increased life.
Readmore

Technical Details

"not bad for the 'sale' price" 2009-02-18
By Hoen J. Anderson (usa)
not bad for the price. Seem to wear out fairly fast, but compaired to other comparable sanding discs I would say they are acceptable.

"It's a bargain, considering how long it lasts" 2003-06-12
By Bob Feeser (Springfield, PA USA)
When I first bought my Bosch 3727DVS, I bought a box of the popular grades; 80, 100, 120, 150, 180, 220, and 320. The 100, 120, and 150 are the most frequently used.To tell you the truth, I rarely use the 320. I just went through over 50 boards of 80+ inch cedar, in three grades, and I only used about 10 sheets all combined. That is about 3 for each grade. The advantage to quality paper, is that you can get in a groove with some consistency. Instead of having cheaper paper that gives you the new disc agressiveness, then quickly to the used paper smoothness, which may be a grade finer, and miss the deeper lines from the coarser grade of paper in the previous step. Additionally the backing paper is stiff enough to do the job. That way you don't wind up with a buggered edge on your sander. The 6 hole paper is nice for the dust free environment. I simply attach a 2 1/2" vac hose to the dust port on my Bosch, which is way smaller than that, so a lot of air escapes. The vacuum draw that leaks around the inlet, sucks up that last 1% of the dust coming off the paper. It is still recommended to wear a mask because the shop vacs only capture to a micron or so. So technically you have a vac system that is actually a mini-part of a micron, invisible dust manufacturing plant. Over time, even that is a consideration. A good respirator, not a paper mask is advisable. A fresh air system is even better.
I had a body shop for 20 years, and after using the cheaper paper on the random orbit sanders, and winding up with a floor full of used paper, I can attest to the savings of using quality, aluminum oxide paper. It is actually cheaper, in addition to doing a better job. Highly recommended.

Images Product

Buy Mirka 23-624-120 6" 6-Hole 120 Grit Dustless Hook & Loop Sanding Discs - 50 Pack Now

Milwaukee 49-22-0220 10-Piece General Purpose Hackzall Blade Set

2010-04-07T08:03:00.001-07:00

Buy Cheap Milwaukee 49-22-0220 10-Piece General Purpose Hackzall Blade Set

Buy Low Price From Here Now
Reciprocating Jig - Saw Blades & Saws Saw Type: Reciprocating Length: 4 Teeth per Inch: (2) 6TPI, (3) 14TPI, (3) 18TPI, (2) 24 TPI Fractional Widths: 3/4 Thickness: 0.035 In. Shank Type: Universal
Readmore

Technical Details

- Thin kerf for up to 35% more cuts per charge vs. leading reciprocating saw blades
- Short blade length for cutting in tight locations
- Bi-metal construction for increased tooth durability and long blade life
See more technical details

"Does what their supposed to." 2010-02-19
By The Accretion Desk (Under the Big Sky, Montana)
Works as advertised. Maybe not the longest lasting blades in the drawer, but for tight work, these rock.

"Don't need these for the Hackzall, any sawzall blade will do" 2009-12-20
By Laura Andrews (Portland, OR)
I bought these to go with the hackzall thinking they were necessary, but they were not. Any Sawzall blade will work with the hackzall. Just FYI. They are still nice blades, just overpriced.

"Hackzall Blade Set Review" 2009-09-14
By G. Abad (SF Bay Area, CA, USA)
Bought the 10-piece Hackzall Blade Set for my new Milwaukee M12 Hackzall. The blades work great. The carry case is very handy to keep the blades stored safely. Definitely work the money.

"Great starter set" 2009-05-17
By A. Paredes (Los Angeles, CA)
Good variety of blades to test out the capabilities of your Hackzall. Oddly, these blades seem to last longer than standard recip saw blades. Or maybe I'm just not using the Hackzall in as intense situations as I would a standard reciprocating saw. Still, I sliced up a one-piece fiberglass tub w/ surround into quite a few pieces and cut out the surrounding drywall with one PVC blade. Blade still looks great.

"Milwaukee hacksaw blade set" 2009-03-25
By Jeff T. (Midwest, USA)
Superior quality blades. I have not found a better blade than Milwaukee.

After acquiring this set I performed multiple jobs over several days with a single blade. Main use was cutting trees and tree branches. After putting this blade to the test, it is still sharp and going strong.

I would recommend these blades to anyone.

Images Product

Buy Milwaukee 49-22-0220 10-Piece General Purpose Hackzall Blade Set Now

SE Diamond Hole Saws 1/4" - 2 3/8"

2010-04-06T21:26:00.001-07:00

Buy Cheap SE Diamond Hole Saws 1/4" - 2 3/8"

Buy Low Price From Here Now
10 Pc Diamond Hole Saw Set, Sizes: 1/4, 3/8, 1/2, 3/4 and 1 on 1/4 Shank.Sizes: 1.1/4,1.3/8, 1.1/2, 2, 2.3/8 on a 3/8 Shank., Comes in a Wooden Box.
Readmore

Technical Details

- 10 Pc Diamond Hole Saw Set
- Sizes: 1/4, 3/8, 1/2, 3/4 and 1 on 1/4 Shank.
- Sizes: 1.1/4,1.3/8, 1.1/2, 2, 2.3/8 on a 3/8 Shank.
- Comes in a Wooden Box.
- Made In China
See more technical details

"Worked well for me" 2009-12-17
By Amateur Tiler (Florida)
All I can say is the diamond hole saws were exactly what I needed. I have only used 3 of the saws. The ones that I used were on porcelain tile and they provided a nice clean finish. I had to make a template out of wood to place on top of the tiles to keep the saw from skipping. But, that did the trick and it helped hold in a little water as well.

"Diamond hole saw" 2009-11-25
By Rebecca
I cut three holes each with two of the saw bits. They cut the holes thru 1/2 in granite. The cutting edge showed considerable wear with just the three cuts. I got what I wanted from them in the short term, but I doubt they would be acceptable for everyday/extended use

"Can't beat the price!" 2009-09-03
By D. Sargent (New England)
I bought this hole saw set because it was an unbelievable price and I trusted the reviews. I was not disappointed. One name brand professional bit can easily cost what this entire set costs! My first test was to cut a hole in a granite kitchen counter top. It did so flawlessly.

As another reviewer wrote, the hole saws do not come w/centering bits (some of the bits are too small for centering bits anyway). This is easily overcome (as the same reviewer wrote) by making a template out of plywood (Use a wood bit to pre drill a hole of equal size in the plywood). I used two sided tape to stick the plywood to the granite and a sponge to keep the bit wet and soak up the slop.

I don't think the bits will last forever cutting granite (for the price I would have never expected them to) and they bottom out at about 1-3/8", but it is certainly nice to have a pretty varied assortment of bits that you can trust to make accurate holes in stone or tile.

"Worked liked a charm" 2009-04-07
By William T. Moore (Oregon)
I used the drills to make a hole in Travertine tiles and used a V shaped board to help center the drill, since it does not have a pilot drill. It worked great, better than what I had expected.

"Not bad for the money" 2008-12-06
By R. Heisler (Jackson, NJ)
I used the 1 1/2in size to enlarge the hole in my granite counter top to accommodate a new hot water tap that replaced a soap dispenser. I first cut a 1 1/2in hole in a piece of plywood, taped it to the counter that drilled away while my wife sprayed cold water at the bit to keep it cutting smooth. All and all I would say the bit worked very good, great for the money.

Images Product

Buy SE Diamond Hole Saws 1/4" - 2 3/8" Now

Mirka 23-615-100 5" 8-Hole 100 Grit Dustless Hook & Loop Sanding Discs - 50 Pack

2010-03-01T05:55:00.001-08:00

Buy Cheap Mirka 23-615-100 5" 8-Hole 100 Grit Dustless Hook & Loop Sanding Discs - 50 Pack

Buy Low Price From Here Now
Mirka Abrasives INC 23-615-100 - 100G - Bulldog Gold - 5" 8-HOLE GRIP DISC 50/BX - Premium paper for finishing as well as heavy stock removal - Durable aluminum oxide grain delivers a fast, exceptionally long lasting cut - High strength resin bonded system - C & D-weight backings are 50% stronger than other premium brands using A-weight backings - Made with an anti-load stearate to provide increased life.
Readmore

Technical Details

"Great packaging for larger jobs" 2009-03-23
By Thomas Ritch (Gilbert, AZ)
I just finished a 700 sq. ft. tongue 'n groove ceiling project, and used multiple boxes/grits of the Mirka product. Much cheaper than the typical DIY home store pricing, and if you have a large project like I did, you'll save big bucks. These are high quality disks that get the job done.

"good stuff-good price" 2008-11-04
By Ron (Bainbridge Island)
This is my third box of this stuff, and I don't see any reason to buy anything else. I have used a few brands of discs. most are OK. this is as good as any, and better then most. paper is nice and thick and holds up well. the stuff stays sharp. There are better brands, but they tend to be about 75 cents a sheet. This stuff also beats the pants off the crud you get at HD too

"Great value and good quality" 2008-08-29
By shelley stallings (Alaska)
These sanding discs are a great value, best disc I have found at this price. Seem to last as long or longer than much higher priced discs. the hook & loop surface has great gripping strength, never had one come loose from sander.

"Good product but nothing special compared to others." 2007-12-21
By R. Shaw (Hanford, CA USA)
I bought the assortment pack as well as 120 and 220 grits in preparation for refinishing my kithen cabinets. I have used the 80 and 100 grit from the assortment pack and find them quite acceptable. However, I don't see much difference between this brand and the Norton abrasives brand I can buy at Home Depot. Packs of 50 are almost $10 in the store, Mirka are around $8 per 50 sold in 100 packs. Once you add shipping, unless you buy a large quantity, you're not saving anything. I disagree with one of the other reviewers that said Norton brand discs are thinner and ware out faster. I couldn't notice any appreciable difference between Nortons and Mirka's disc thickness. The abrasive is aluminum oxide for both.

Images Product

Buy Mirka 23-615-100 5" 8-Hole 100 Grit Dustless Hook & Loop Sanding Discs - 50 Pack Now

Mirka 23-615-150 5" 8-Hole 150 Grit Dustless Hook & Loop Sanding Discs - 50 Pack

2010-03-01T05:53:00.001-08:00

Buy Cheap Mirka 23-615-150 5" 8-Hole 150 Grit Dustless Hook & Loop Sanding Discs - 50 Pack

Buy Low Price From Here Now
Mirka Abrasives Inc. 23-615-150 150 Grit Bulldog Gold 5" 8-Hole Grip Disc 50/BX - Premium paper for finishing as well as heavy stock removal - Durable aluminum oxide grain delivers a fast, exceptionally long lasting cut - High strength resin bonded system - C & D-weight backings are 50% stronger than other premium brands using A-weight backings - Made with an anti-load stearate to provide increased life.
Readmore

Technical Details

"Much cheaper than from 'box' stores" 2009-10-16
By Nathan Beauchamp (Oak Park, IL USA)
This is an excellent value if you've got a lot of sanding to do. These are equivalent to more expensive brands, and much cheaper than what you'd pay at a big-box store. We used them for sanding down wood trim and they were perfect for that application.

Inexpensive, well made, and durable. Recommended.

"quality stuff" 2008-11-04
By Ron (Bainbridge Island)
This is my third box of this stuff, and I don't see any reason to buy anything else. I have used a few brands of discs. most are OK. this is as good as any, and better then most. paper is nice and thick and holds up well. the stuff stays sharp. There are better brands, but they tend to be about 75 cents a sheet. This stuff also beats the pants off the crud you get at HD too

"Good Cheap sandpaper" 2008-01-22
By Jesse L. Bucholtz (Melbourne, FL)
Good cheap sandpaper. Does clog faster than some of the more fancy stuff, but for the price, the quality is there...

Images Product

Buy Mirka 23-615-150 5" 8-Hole 150 Grit Dustless Hook & Loop Sanding Discs - 50 Pack Now

Diamond Hole Saw Set (6 PC) 5/32 "- 1/2"

2010-03-01T05:52:00.003-08:00

Buy Cheap Diamond Hole Saw Set (6 PC) 5/32 "- 1/2"

Buy Low Price From Here Now
6 Pc Set, 5/32", 3/16", 1/4", 5/16", 3/8",1/2". Set comes in plastic case.
Readmore

Technical Details

- Hole sizes - 5/32", 3/16", 1/4'', 5/16'', 3/8'' and 1/2"
- Nickle plated - Diamond coating
- Superior performance - Great for holes in marble, Slate, Glass, Tile etc.
- Made In China
See more technical details

"great bits for the money" 2010-01-31
By sc20
I was unsure of these bits before I bought them, based purely on the price. I was unsure of these bits when I received them and it looked like they were poorly dipped in glitter glue. I was completely sold on how well these worked when the 1/4" powered through the wine bottle I was working on with ease, no chipping or cracking...For the money I'm not sure you can get any better

"cuts easily" 2010-01-25
By Jeffrey M. Sible (hopwood pa. usa)
only used the 1/4 in and 1/2 inch, both worked great, keep cool with water and make a wood template to hold bit, and cut away.

"Good product for the money." 2009-01-09
By Ron S. (Northern Indiana USA)
I purchased this set for drilling holes in some extremely hard porcelain tile. They worked exactly as needed. We ran them at a slower speed and kept them well lubricated with water while cutting/grinding. I can't speak to their long-term durability since we needed to make less than a dozen holes. I would suspect that with their small size and small cutting surface their useful life would be somewhat limited. Having said that, they were exactly what we needed since no other drill would make a dent in the tile. The nice size selection allows you create the exact hole size needed. Overall, I was very pleased with the price/performance ratio.

This was purchased from hobbytoolsupply here on Amazon and shipping was extremely quick.

Images Product

Buy Diamond Hole Saw Set (6 PC) 5/32 "- 1/2" Now

Mirka 23-615-220 5-Inch 8-Hole 220-Grit Dustless Hook-and-Loop Sanding Disks - 50 Pack

2010-03-01T05:52:00.001-08:00

Buy Cheap Mirka 23-615-220 5-Inch 8-Hole 220-Grit Dustless Hook-and-Loop Sanding Disks - 50 Pack

Buy Low Price From Here Now
Mirka Abrasives INC 23-615-220 - 220G - Bulldog Gold - 5" 8-HOLE GRIP DISC 50/BX - Premium paper for finishing as well as heavy stock removal - Durable aluminum oxide grain delivers a fast, exceptionally long lasting cut - High strength resin bonded system - C & D-weight backings are 50% stronger than other premium brands using A-weight backings - Made with an anti-load stearate to provide increased life.
Readmore

Technical Details

- Durable aluminum oxide 220 grit
- High-strength resin bond system
- Increased life, made with anti-load stearate
- Hook-and-loop design; can also be used with a standard pad with no punched holes
- Affordable at 50 per box
See more technical details

"Fits all, works well" 2010-02-01
By Richard J. Mckinnon (Hartsville, SC USA)
In both vertical and horizontal applications the Mirka sanding disks stays put, doesn't slide around and outlasts their competition. I used them on my Porter Cable Orbital sander with dust collection and I haven't experienced any clogs or dust accumulation around the holes. What else is there to say?

"ltpsp" 2009-11-11
By ltpsp (Fla)
Good buy, good price beat the local stores and we use a lot of these in our workshop

"Worthless" 2009-08-11
By Glenn Weber (Palmdale, California)
I now use exclusively 3M sandpaper after receiving a sample at a trade show, you have to use three Mirka sandpaper disc for every one 3M sandpaper disc. I used to think sandpaper was sandpaper didn't make a bit of difference who manufactured it, I was wrong.

"this is a great final for hard woods" 2009-01-22
By A. Mandeville (Connecticut)
the Mirkas hold up very well with very little build up and excellent edge wear

Images Product

Buy Mirka 23-615-220 5-Inch 8-Hole 220-Grit Dustless Hook-and-Loop Sanding Disks - 50 Pack Now

Mirka 23-615-080 5" 8-Hole 80 Grit Dustless Hook & Loop Sanding Discs - 50 Pack

2010-03-01T05:51:00.001-08:00

Buy Cheap Mirka 23-615-080 5" 8-Hole 80 Grit Dustless Hook & Loop Sanding Discs - 50 Pack

Buy Low Price From Here Now
Mirka Abrasives INC 23-615-080 - 80G - Bulldog Gold - 5" 8-HOLE GRIP DISC 50/BX - Premium paper for finishing as well as heavy stock removal - Durable aluminum oxide grain delivers a fast, exceptionally long lasting cut - High strength resin bonded system - C & D-weight backings are 50% stronger than other premium brands using A-weight backings - Made with an anti-load stearate to provide increased life.
Readmore

Technical Details

- 50 dustless hook and loop sanding discs
- Made with antiload stearate for increased life and durability
- Durable aluminum oxide grain; high-strength resin bond system
- 5-inch size, 80-grit, 8-hole
- Pack of 50 discs; weighs 1 pound shipped
See more technical details

"great disc" 2009-09-28
By Horia Haghiac (Akron, OH United States)
I strongly recommend those disks as they are cheap and well made (not China, it is actually made in Finland).

Take a look at the price at Home Depot, Lowe's or Walmart for the similar product.

"Xlnt price on ths quality product" 2009-09-18
By Randy Ajax (Rancho Cucamonga, Ca)
I Ran out of these and bought a more expensive brand to hold me over from a local paint store and they didn't last any longer than these and cost three times the price.

"Watch the dust fly" 2009-05-06
By Bunker (Seneca, SC USA)
Fast delivery, great sanding discs, great price. Best quality I can find. I get my work done faster.

Mirka 23-615-120 5-Inch 8-Hole 120-Grit Dustless Hook and Loop Sanding Discs, 50-Pack

2010-03-01T05:50:00.001-08:00

Buy Cheap Mirka 23-615-120 5-Inch 8-Hole 120-Grit Dustless Hook and Loop Sanding Discs, 50-Pack

Buy Low Price From Here Now
Mirka Abrasives INC 23-615-120 - 120G - Bulldog Gold - 5" 8-HOLE GRIP DISC 50/BX - Premium paper for finishing as well as heavy stock removal - Durable aluminum oxide grain delivers a fast, exceptionally long lasting cut - High strength resin bonded system - C & D-weight backings are 50% stronger than other premium brands using A-weight backings - Made with an anti-load stearate to provide increased life.
Readmore

Technical Details

- Durable aluminum oxide grain
- High-strength resin bond system
- Increased life, made with antiload stearate
- 120-Grit
- 50-Per box
See more technical details

"Great product!!" 2009-06-19
By Warren W. Wiley (Ottertail)
Now THIS is sandpaper! I bought several grits and used them on different woods and projects. Talk about FAST cutting and clean! Trust me,once you use this stuff you'll never waste money buying three sheets of domestic stuff for $5. Look at how many sheets of this stuff you get for the price. And it easily lasts three times as long as the hardware store stuff does.

Try it. You'll stock up on it, just like I did. Great product.

"great sanding discs" 2008-11-09
By Barry G. Hardman (Clinton Ut.)
This is the best brand of sanding discs I have found. They clog less and last much longer than other brands I have tried.

"Great Value" 2007-09-11
By J. Kulaga (Madison, WI USA)
I took a chance and tried this product. I was pleasantly surprised at how long they lasted, comparable to the much more expensive brands.

"Worth the wait, if you have to wait for them." 2007-04-05
By Jeffrey Smith
These discs are well constructed. The paper backing is the thickest that I have seen and they don't seem to wear out as fast as other discs. I had to wait a month to get them though.

Images Product

Buy Mirka 23-615-120 5-Inch 8-Hole 120-Grit Dustless Hook and Loop Sanding Discs, 50-Pack Now

Kreg V05-DVD Pocket Hole Joinery DVD, Building Tables

2010-03-01T05:45:00.001-08:00

Buy Cheap Kreg V05-DVD Pocket Hole Joinery DVD, Building Tables

Buy Low Price From Here Now
Accelerate your learning process with this instructional DVD. The Pocket Hole Solution series features TV personality John Sillaots as he leads you through the various steps needed to build your own custom tables providing fast, strong, simple approach to your next woodworking project.
Readmore

Technical Details

- DVD guide for making your own tables
- Hosted by woodworking guru John Sillaots
- Includes step-by-step instructions
- Features use of the Kreg 2000 jig
- An excellent visual learning tool
See more technical details

"not worth the money" 2010-01-30
By Daniel C. Leonard (Texas)
the dvd shows you how to build ONE table ,the one on the cover.and thats it.

the cover should say TABLE! not TABLE'S. it's not worth the money

"Good overview of product use" 2010-01-24
By DAVID K. TYLER (Las Vegas, NV)
Good overview of how to use the product. Probably should have been a little cheaper for what is basically advertising, or included with jig.

"Some good info" 2009-11-17
By L. Ballard (Utah)
This DVD takes you through making a table using the Kreig. It contains some good information. Things you may not have thought of.

"Save your money" 2009-11-16
By Matthew Hickey (Manhattan, IL)
This dvd is not totally useless. A novice like me can always learn, as I did, some new methods that will help me over time. I cannot afford the equipment shown in the video and neither can you if wood working is a hobby. No wonder the host measures once and then cuts. The camera work was terrible at key points in the DVD. But the host and the camera are always in sync for the infomercial parts. Keep your money until the DVD's match the quality of the Kreg Tools.

"kreg" 2009-08-10
By Walter C. Mickens Jr.
very informative information on the kreg system and how to use it to build tables.

Images Product

Buy Kreg V05-DVD Pocket Hole Joinery DVD, Building Tables Now

Milwaukee 49-22-1560 1/4-Inch Chuck Attachment

2010-01-21T06:08:00.001-08:00

Buy Cheap Milwaukee 49-22-1560 1/4-Inch Chuck Attachment

Buy Low Price From Here Now
The Milwaukee 1/4-Inch Chuck Attachment is an ideal replacement chuck and allows the same flexibility in drilling and driving capabilities as a driver drill or corded drill with a 3-jawed chuck. This replacement 1/4-inch chuck comes as standard equipment with Milwaukee 2.4-volt single and 2-speed cordless screwdrivers.
Readmore

Technical Details

- Durable 1/4-inch replacement chuck attachment
- Allows similar flexibility in drilling and driving capabilities as a driver drill or corded drill with 3-jawed chuck
- Comes as standard equipment on Milwaukee 2.4-volt cordless screwdrivers
- Designed for professional-grade durability; 3-jawed adjustable chuck
- Weighs 6.4 ounces shipped
See more technical details

"Quick Release Chuck for Milwaukee quarter drive impact" 2009-10-26
By Keivn L. Rasmussen
Not as steady or true as a regular drill but in a pinch it's nice to not have to carry the drill with you as well.

"Gets the job done, but nothing special" 2009-10-09
By Eric S. Olstad (New Jersey, USA)
This is a nice little attachment to have to save yourself from having to go out and buy drill bits that have a hex end. Just pop this bad boy in there and you'll be able to use *most* of your drill bits. The problem is that it's only 1/4". The larger drill bits simply won't fit. 1/2" would have done the trick, but there doesn't seem to be a 1/2" chuck attachment anywhere.

It certainly gets the job done though. It locks up nice and tight using the chuck key. You never have to worry about it loosening up on you in the middle of work as some of the keyless chucks are prone to.

But now the problem comes down to where do you put your chuck key? Most of the drills that have the quick swap "chuck" are small and don't have any room for magnets or whatever you would need to hold the chuck key for you. So, that's definitely an issue. But I guess the saving grace for that is that it's a common chuck key and you could find a replacement easily. If not, it's still somewhat possible to use your hand (provided you have a glove or some really thick callouses).

"Easy Chuck" 2009-10-06
By Links Pilgrim (San Diego, California USA)
This completes the sub-compact drill purchase. It does what it was intended -- good chuck!

"What's the capacity?" 2009-10-01
By J. Partridge (Michigan)
Hey what's the capacity of this chuck? I know they call it a "1/4-Inch Chuck Attachment", but that might be the drill bit capacity or the size hex drive that it fits. I can't seem to find the info on Milwaukee's site.

Thanks,

John

"Milwaukee 49-22-1560 Chuck" 2009-05-21
By P. Johnson (Pengilly, MN USA)
Handy item. Hex drive drill bits are pricy to use, snap one and it is junk. With this 'lil chuck you can use standard shank bits in a hex driver, do a pilot hole, pop out the chuck, pop in a driver bit.

Images Product

Buy Milwaukee 49-22-1560 1/4-Inch Chuck Attachment Now

Kreg V03-DVD Pocket Hole Joinery DVD, Cabinet Making

2010-01-19T21:20:00.001-08:00

Buy Cheap Kreg V03-DVD Pocket Hole Joinery DVD, Cabinet Making

Buy Low Price From Here Now
Accelerate your learning process with this instructional DVD. The Pocket Hole Solution series features TV personality John Sillaots as he leads you through the various steps needed to build your own custom cabinets providing fast, strong, simple approach to your next woodworking project.
Readmore

Technical Details

- DVD guide for making your own custom cabinets
- Hosted by woodworking guru John Sillaots
- Includes step-by-step instructions
- Features use of the Kreg 2000 jig
- An excellent visual learning tool
See more technical details

"So-So" 2009-07-30
By rwizard (USA)
While I suppose this is useful if you have never seen the system used, Kreg is better at making tools than they are at making videos. It isn't bad, but it isn't excellent either.

"Big Disapointment" 2009-06-20
By Mr. Mustang (WI)
This DVD was VERY DISAPOINTING. I do highly recommend the Kreg Trim Carpentry DVD Kreg V07-DVD The Pocket Hole Solution to Trim Carpentry and Kreg Router Table DVD Kreg V06-DVD-Pocket Hole Joinery DVD, Building a Router Table. You will learn more about the Kreg Pocket hole system and techniques by purchasing the other DVDs and then adapting the techniques to your application.

"Very disapointing" 2009-03-12
By S. Bloom (North Canton, OH)
This video is a let down. Don't get me wrong, I love the Kreg Jig and using pocket hole joinery. I have built several bookcaes,and other cabinets with face frames, but never have I attemted to build cabinet doors. This video shows you how to build everything but what I consider the hardest part - THE CABINET DOOR! In the video he says "we build the door using pocket screws too" and that's all you get. Very disapointing.

"Rip off" 2008-12-19
By woodworker (usa)
My wife gave me this as a gift. She meant well, so I appreciate it.

But this DVD is worthless. Waste of money. Con job. I like Kreg tools, but they need to get out of the DVD business. I don't see why they want to screw over their customers like this. I feel like my wife just paid $10 for me to see some low budget infomerical. Wait a minute, the infomerical would actually have more information.

Even a total newbie would be better off getting his information elsewhere.

I agree with the other reviewer: SHAME ON YOU KREG. SHAME, SHAME, SHAME. You saw the chance to make a quick buck and didn't care if you screwed us over. If I ever meet the CEO of Kreg, this DVD is going to be shoved up a very dark place on his person.

"Good training tool for those that learn visually" 2008-11-23
By Edgardo Rivera (Barceloneta, Puerto Rico)
The DVD is short and it doesn't focus specifically on the tool. Having said that, it's a good learning tool for those that prefer to learn visually, instead of reading through the manual. It would have been better if they had covered their frequently asked questions (FAQ's) from their website. It's OK for the price, but something like this should have been provided for free on their website.

Images Product

Buy Kreg V03-DVD Pocket Hole Joinery DVD, Cabinet Making Now

Kreg Jig K4 Pocket Hole System

2010-01-19T21:11:00.001-08:00

Buy Cheap Kreg Jig K4 Pocket Hole System

Buy Low Price From Here Now
Priced roughly $40 less than the previous K3 model, this full-service pocket-hole drilling system is packed with value. It includes all the core equipment and everything you need to drill fast and easy pocket holes: a classic benchtop design, compatibility with all Kreg Jig Master System accessories, even a SkillBuilder DVD and rugged carrying case! For strong, convenient, and professional-looking joinery, this is it.

The K4 system includes the following:
-Main bench-mounting unit with toggle clamp
-Patented removable 3-hole drill guide
-Spacer block attachment for repairs
-3/8" step bit to drill pocket hole and 3/16" pilot hole in one step
-6" long #2 driver bit
-Dust Collection attachment
-Rugged carrying case, SkillBuilder DVD, and detailed instructions
Readmore

Technical Details

- Our patented 3-Hole Drill Guide lets you make perfectly placed Pocket-Holes in a wide variety of material widths and thicknesses, without ever having to release the clamp and reposition the workpiece
- Whether you're using our multi-purpose face clamps or any common bar clamp or c-clamp, the large clamping recess makes it easy to secure your jig to your workbench during use
- For the hard to reach repair applications or when you just want to take your work on the road, the Kreg jig's removable Drill Guide guarantees that you'll always have the right tool for the job
- Removable drill guide block doubles as a repair tool
See more technical details

"Love the jig, not sure about the blue screws?" 2010-01-17
By Jonathan Gelaude (Denver, CO)
I just began building the Kreg workbench. I figured I'd start with a basic project like this to familiarize myself with the Kreg jig and how it operates. If I make a mistake on this, the wood is just inexpensive 2x4s that I can easily replace.

I really like the fact that it comes with the DVD, which gives all the basic details and is broken down into sections so you can easily go and just rewatch one section again.

One bit of advice I'd give from what I've experienced with the jig so far is that instead of drilling the pocket hole in one motion, I found it works better to drill down maybe a 1/4 to 1/3 of the way, then back the drill bit out to clean out the hole, then continue on in this fashion until you reach the drill stop. The holes are cleaner-cut this way and it's easier on your tools. This technique has worked well for deep holes for the 2x material. I also had one piece of wood that I neglected to sort out when I selected my wood that was heavier than all the others, so it's wetter than the others. I did have to make sure and clean the holes in the jig out after this, as they did gum up a bit from the moist sawdust produced from this one piece of wood.

I do wish the jig came with a few more screws right out of the box. You get an assortment of different sizes, but only 10 or so of each. This allowed me to basically get one little section of the workbench put together. I then had to go searching for screws. The problem was, neither Home Depot, nor Lowes carries the 2.5-inch screws. Luckily, there is a Rockler store in Denver. But when I got there, they only had one box of the 2.5-inch screws in a 50-pack, and they were the blue "weather resistant" ones. I didn't care because the screws are all hidden. I think the box was $1 more than the normal screws would've been.

Now this jig and these screws are all brand new to me. But, at this point, I did have a problem yesterday when using the blue screws. I don't know if it's the coating on them or what, but they drove down into the hole and then proceeded to strip out the threads they'd just drilled! I hadn't changed the torque setting on my drill at all from using it the day before with the regular Kreg pocket hole screws that came with the jig. So, I backed off the torque a bit and tried another screw in another hole. Same thing! I then turned the torque almost all the way down on the drill. That worked. Then I tightened that one by hand. After that, I tried driving another one by hand. I can certainly work around this, but I'm definitely apprehensive about using the blue screws again on anything else that might call for them, such as a potting bench, or outdoor chairs, etc. Kreg does make stainless steel pocket hole screws, but a box of 50 was about $25, compared to $6 for the blue screws. They do package larger quantities together as well. There was a box of 250 of the regular 2.5-inch screws that I needed, but I don't need anywhere near that many of that size screw at this point in time. However, if you were going to make, say several outdoor chairs, or multiples of anything for that matter, it is more cost effective to buy the larger boxes of screws.

I know this is supposed to be a review just for the jig, but these items all go together, so I figured I'd mention my issue with the blue screws. Before that, I did not have one problem with the regular screws. They worked flawlessly.

I am definitely looking forward to many more projects using the Kreg jig system. I don't have a lot of shop tools and no woodworking tools, other than a few basic chisels, etc. So, this gives me the opportunity to try my hand at woodworking a bit before investing a lot of money and space for things like a nice table saw, drill press, planer/jointer, tons of clamps, etc.

Is a matter of fact, I actually bought this jig to build two built-in bookcases and an adjoining mantel. I will be using the Kreg jig to build the boxes for the bookcases, as well as the faceframe and doors. No need to worry about mortise and tenons for the doors, or gluing and clamping biscuits into place and then waiting for the glue to dry. Once I get the workbench done, I'll then have a nice work surface to begin the bookcases on. If I get a chance, I'll come back and add more info once I've used the jig a bit more on plywood and hardwood for the bookcases.

So far, I'm quite impressed with the Kreg jig (other than the above-mentioned blue screws). I'm sure I'll find a ton of uses for it in the future. I've already started thinking about building a couple of nightstands and a blanket chest, something I probably wouldn't have thought of doing before buying this jig.

"my standard assembly tool" 2010-01-17
By Mark W. R. Wilson
As a newcomer to home improvement and woodworking this is my standard method of building things. As a complete (and impatient) novice I watched the video (pocket hole solutions to trim carpentry) about 20 times and then went to work. I've built shelves and tool stands, and repaired my roof. I love this whole system--I can build most anything quickly. It is strong, and, unlike any other system, can be disassembled (even the screws can be re-used!), which is important---as a newbie I make mistakes! NO problem-- just unscrew, correct, and re-assemble. No waiting for glue to dry either. Kit is well-built in the USA. I recommend getting the vacuum attachment and a few of the clamps to start. You do have make sure the wood is cut perfectly square. The only thing I would correct would be to add a little hole to store the allen wrench and use some white paint to highlight the numbers on the jig. My carpenter friend now is bugging me to borrow it to build cabinets with on his next job. Better than lego or tinker toys :-)

"So easy a child can use it," 2009-11-05
By Rosemarie (New Jersey)
I love this tool it is my favorite non electric tool I own. I too wish I bought it sooner there were so many things that did not come out the way I liked because I didn't have the jig. Seriously I am a retired grandma and if I can use it really anyone can I made many wonderful things including a large chicken coop for my girls with gates. You can't go wrong with this tool. You don't have to get the best one just get ONE.

"Kreg Jig" 2009-11-01
By W. Betancourt (Lancaster Pa.)
What a time saver

I am restoring an old camper

It would be impossible without my KREG

"excellent product" 2009-10-26
By T. Crump (Texas)
As others have noted, this is an excellent product for some fast, effective joinery. Well designed and easy to learn. It will not work for all your joinery needs, but it will make lots of projects easy. Only drawbacks I found are 1. Joints aren't as strong as biscuit joints. 2. Even though they make hole plugs, I wouldn't want to use it where the pocket holes are showing. Besides that, it's a great product.

Images Product

Buy Kreg Jig K4 Pocket Hole System Now

Mirka 23-615-AP 5-Inch 8-Hole Assorted Grits (10 Each Of 80/100/120/150/220) Dustless Hook-and-Loop Sanding Disks

2010-01-18T03:32:00.001-08:00

Buy Cheap Mirka 23-615-AP 5-Inch 8-Hole Assorted Grits (10 Each Of 80/100/120/150/220) Dustless Hook-and-Loop Sanding Disks

Buy Low Price From Here Now
All sandpaper is not created equal. As a result, we love Mirka paper. The backing is beefier than other papers, and to us, that means quality. Aluminum oxide grain is the choice of most woodworkers because it's sharp, durable and, best of all, long-lasting on the higher paper grades that won't shred on the edges. This assortment is perfect for professionals, homeowners, and hobbyists because it includes everything from stock-removing 80-grit to a nice 220 finishing grit. Yes, you can spend less on other sandpapers, but you'll end up spending more in the end. This is quality. --Kris Jensen-Van Heste
Readmore

Technical Details

- Durable aluminum oxide grain
- High-strength resin bond system
- Increased life, made with antiload stearate
- Fits DeWalt DW421, DW423, 5-inch Ryobi and Bosch 3107, 3725, and Makita B05010
- 50 per box, 10-pieces each of 80, 100, 120, 150 and 220 grits
See more technical details

"Really good value - Equal quality at better price" 2009-12-31
By J. Hutchin
Great value and incredibly fast shipping! These arrived 1.5 days after I ordered them. These are quality pads with good backing for a much better price than Norton sandpaper or other brands you see at Home Depot / Lowes. I've been doing lots of sanding of red oak while restoring a 117 year old house and they work great on a Bosch random orbit sander. Very satisfied.

"Bargain Disks" 2009-12-28
By Duffer. (Conyers, GA United States)
You get 50 disks for less than 20 bucks. Hard to beat that deal. These disks do an excellent sanding job and are easy to attach and remove. As an added bonus these disks are made in Finland which accounts for their quality. In addition, Finland is not known for using harmful chemicals in their manufacturing process so they are safe to handle. Try them and you will like them.

"Mirka 5-Inch 8-Hole Assorted Grits Dustless Hook-and-Loop Sanding Disks" 2009-12-10
By RPK
I am new to using this type of sanding. The Porter-Cable sander, which I purchased, along with these Mirka disks has exceeded my expectations. I was used to changing paper fequently on my 1/4 sheet finishing sander... with this set-up I change disks when moving to a finer grit... and the used disks seem like new! I was cautious about the price of this type of sanding system, but it works very well. I will be purchasing more Mirka products, they are worth their cost.

"Nice Assorted Pack" 2009-11-24
By MrG-Review (CT USA)
Perfect multi-pack for the occasional orbital sander user that needs a mix. Made by a quality Finnish manufacturer Mirka. This multipack was a lot cheaper than the Norton & other alternatives available at the local box store (which I returned). So far I used the 80, 120, and 150 and they worked quite well.

"Great product" 2009-10-20
By Dave Jaglall (Guyana, South America)
well this works great on the sander, the only problem im encountering is that it fills quickly with particles, so the life of one is very short.

Images Product

Buy Mirka 23-615-AP 5-Inch 8-Hole Assorted Grits (10 Each Of 80/100/120/150/220) Dustless Hook-and-Loop Sanding Disks Now

kreg r3 jr. pocket hole jig system

2010-01-16T18:53:00.001-08:00

Buy Cheap Kreg R3 Jr. Pocket Hole Jig System

Buy Low Price From Here Now
The Kreg Jig Jr. (R3) is an amazing repair jig and an exceptionally handy addition to any tool collection. Whether you're crawling under a table to make a quick repair or taking Kreg Joinery on the road, the Jr.'s compact design lets you work where you need to most, and it gives you what you need to start building wood joints that will last the life of your creation.

The Kreg Jig® Jr. offers:

A compact design that lets you work wherever you need
Easy-press positioning sliders with 9 settings
2-Hole Drill Guide with Hardened Steel Core and Lifetime Warranty
Convenient design can be used with any standard bar clamp or a c-clamp

Miter joints for picture frames can be completed quickly, since the positioning legs move independently of one another. View larger.

The Kreg Jig Jr. is built to work with any style of clamp and adjusts easily for different material thicknesses. View larger.

Adjusting the Kreg Jig Jr. for different applications is quick and easy. View larger.

Kreg Joinery: No Glue or Complicated Math Required
The Kreg Jig Jr. takes advantage of a technique called Kreg Joinery. Unlike other techniques, Kreg Joinery requires no glue, no complicated math, and no small army of clamps to make wood joints that will last.

With Kreg Joinery, you can finish projects in hours instead of days. You won't spend any time clamping, waiting for glue to dry, or wading through complicated math. It essentially involves drilling a hole at an angle into one workpiece, and connecting it to another workpiece with a self-tapping screw.

Amazingly Strong with Half the Effort
Unlike mortise and tenons, dowels, and biscuits, the self-tapping screws inside of every Kreg Joint hold the stock together without glue. You don't have to worry about precisely lining up dowel holes, or spending hours cutting a perfect mortise and tenon--you simply drill the holes, drive the screws, and move on to the next project.

And because what you see is what you get with Kreg Joinery, you won't spend all your time calculating stock-overlaps and dry-fitting individual workpieces. All you need is simple math to get fast and accurate results.

Kreg Jig Jr: The Perfect Home-Repair Tool
The Kreg Jig Jr. is an amazing repair jig with a compact design that lets you work where you need to most. Thanks to its Clamp Pad Adapter, the Jr. can be secured to the workpiece with any standard bar clamp or c-clamp. In addition, the adapter allows the jig to be attached directly to any Kreg Face Clamp (sold separately) for faster and more repeatable pocket-holes.

From thin drawer boxes and craft projects to stout 2x4's, this jig can handle them all. Independent Easy-Press positioning sliders feature nine separate depth settings, allowing you to easily join materials from 1/2-inch to 1-1/2-inches thick in 1/8-inch increments. And to set the jig properly, you simply depress the button on the side of the jig and move the sliders so your material thickness is aligned with the arrow on the jig body. It couldn't be any easier.

The Kreg Jig Jr. includes a compact, durable plastic carrying case that will ensure that you always have the tool, drill bit, and screws on hand to complete your next project. As a bonus, the case features a molded depth collar gauge for a handy reference.

In addition to the Kreg Jig Jr. (model R3), Kreg offers DIYers and anyone new to Kreg joinery the Kreg Jig (model K4). For serious wood workers, Kreg offers the Kreg Jig Master System (model K3MS), the ultimate kit for Kreg Joinery.

The Kreg Difference
While each Kreg Jig has its own features designed to meet the particular needs of its users, all Kreg Jigs share a design and high-quality construction which add up to the "Kreg Difference."

Kit includes everything you need to get started.

Each Kreg Jig features hardened steel drill guides that carry a 100-percent lifetime guarantee. The body of each Kreg Jig is made from a heavy-duty glass-reinforced nylon that offers the resiliency and flexibility you need without sacrificing strength and durability.

To create a cleaner pocket-hole and a more finished appearance, all Kreg Jigs shroud the bit and support the workpiece through 100-percent of the drill-stroke. The end result is minimal bit deflection, reduced tear-out, and a clean, pluggable Pocket-Hole fit for finished work.

Every Kreg Jig also features an optimized 15 degree drilling angle designed to increase driving efficiency and minimize the overall size of the Pocket-Hole. This same Pocket-Hole can be created by the Kreg Jig in materials from 1/2- to 1-1/2 inches thick.

The Kreg Jig Jr. includes a 30 Day Customer Satisfaction Guarantee and Lifetime Warranty on its Hardened Steel Drill Guide.

What's in the Box
Kreg Jig Jr., clamp pad adapter, stepped drill bit, 6 driver bit, depth collar, allen wrench, starter screw set, and durable carrying case.

Readmore

Technical Details

- Pocket hole jig system for do-it-yourselfers
- Easy to adjust for materials 1/2-Inch to 1-1/2-Inch
- Solid metal drill guide
- Includes drill and drive bits, depth collar with hex key, 5 sizes of pocket hole screws, clamp pad adapter, case
- Lifetime warranty
See more technical details

"Kreg R3 Jr" 2009-12-29
By M. Mauney (Nampa, Id)
Perfect system for the average DIY. Easy setup and use, performed as advertized. Would recommend.

"Best thing since Sliced Bread // Comparison to the Kreg MKJKIT Mini Kreg Jig Kit" 2009-12-13
By S. Holliday (Raleigh, NC USA)
This is the greatest thing since sliced bread.

So many others have commented on this...I'm gonna contrast this $40 version against the $20 unit (which was my decision point).

I'm contrasting this against the "Kreg MKJKIT Mini Kreg Jig Kit" (aka, the $20 unit. )

I would definitely advise paying the $40 for this version of the tool.

#1. This one has the "depth slides" on the side of the blue box. It allows you to set the proper distance (based on the thickness of the stock).

Aka, if I'm putting pocket holes into 1" thick wood, the "slide adjustments" on the side of this unit allow that to be set in seconds. Then you clamp, and you're drilling in no time. I did not see these on the $20 version.

This has a "clamp holder" piece. Basically, if you get any "official" kreg clamps with a round quarter sized end, you can slide the clamp into this accessory piece ...and do your clamping a little faster. I am using non-kreg C clamps for myself, so this is optional, but a nice little feature.

This unit has 2 side by side drill holes. I like this because I can get a little more strength in my work piece and the 2 side by side screws look really sharp. Using the $20 unit and doing it manually by measuring would just take more time, and not be perfect each time. You of course don't have to put in 2 pocket holes (you can do just one)....but I find myself going ahead and putting the 2 holes at the same time, for a little more strength and not much more effort.

This version has the screw-driving-bit already in the kit. This is the bit that drives the special kreg screws. (Or it may just be a regular square bit..regardless, its in the kit)

This has a little pocket case that keeps everything nice and more importantly "together" so you don't lose any pieces. with my ability to lose tools, this may have been the extra $20 by itself. The pocket case allows you to "snap in" all of the hardware parts. Aka, its not just loose pieces in the case rattling around. Everything besides the screw-samples and plug-samples have their own snap-in-place in the case. Nice work kreg!

The kit comes with a few screws and plugs. That allows you to do some testing without buying a big lot of screws. Just a nice-i-ty I guess.

........

The $20 version is GREAT as well. But I do NOT regret paying the $40 for this version. The first time I made some pocket holes, and felt those screws bring everything nice and tight........I was like "This is AWESOME". It'll probably change the way I make little projects from now on.

............

You need to get (at least) one of the versions ($20 or $40 (or more of course)). But I highly recommend the $40 version.

Some hints:

Visit www.kregjig.com and look at the PDF user manuals. They have the screw size -to- wood thickness guides in them. Aka, if you have 3/4" thick wood pieces, it'll tell you what length screws to get, and whether you should get fine or course screws.

..........

KREG has a great little business model with these and these things rock.

Note: amazon prices were similar to local retail stores for the unit themselves. The screws were actually cheaper locally.....just do some checking before you do the "amazon is cheaper" assumption. I love amazon!.....but I love supporting my local economy as well.

"Better Than Expected" 2009-12-06
By Bigboberta (Greensburg, LA)
I have been using pocket hole screws for several years. The jig I have (not a Kreg) left a lot to be desired. You had to guess where to position the jig to get the screw in the middle of the board. This prompted me to make jigs for each thickness of wood used and worked well, but was cumbersome.

After seeing a video for the Kreg R3 Jr. I decided to try it. To my surprise it has worked better than anticipated. With the thickness guide on the jig and the drill depth gage on the case, there is no more guessing on the setup and no need for other jigs to make perfect pocket holes in a fraction of the time.

"Awesome!!!" 2009-12-05
By Anthony Benavidez
What can I say? Awesome! This is one of the best tools in my box!

"Nice improvements over earlier model" 2009-12-03
By Roger A. Knopf (Menlo Park, CA United States)
I have been using Kreg jigs for many years now, and have this item's predecessor. While I could not live without it, a few things always bugged me - and they all got fixed in this version. It was enough that purchasing it was a no-brainer.

The biggest improvement is the built-in offset lip with markings for all typical lumber sizes. In the old one I had to actually screw the lip that is used to align to the edge of the board on using two screws - and if I was using 2x material, add a spacer using different size screws - and if I was using anything else I had to measure and line it up manually. Good if I was doing a lot of boards, but a real pain for one or two and worse if I was switching back and forth! With this new model, just press in on the tab and slide the gray guide forward until it snaps into place at the mark for the size board I am using.

Second, with the lip in place, the Kreg clamp I was using was trapped in the jig and if I wanted to use it for something else, or just put it away, I had to unscrew the lip. Done away with in the new model, there is a spot sized for the clamp that is proud of the jig. Very easy.

Third, this comes in a nice little case that holds everything but the clamp. My other was part of a set of Kreg jigs so when I wanted to throw it into the toolbag to go to a work site, I had to put all the parts in, and some would eventually go missing. Now I can put the case into the toolbag, very handy.

Fourth, the jig from the old set that showed where to set the drill stop required me to lift the drill out of it in order to get the stop on, and of course it would sometimes slip when I tightened it so I have to recheck and sometimes adjust. Honestly it was such a pain that I got an extra bit and stop just so I could leave one set for 3/4" material and one for 2x material. In the new model the jig is part of the case AND holds the bit at each end, leaving space for the stop so I can tighten it without moving the bit.

Clearly Kreg is listening to their customers and making very handy and sensible improvements while maintaining their high quality. Like I said, buying this one even though the old one still works was a no-brainer. Now I'll just set up the old one for 2x material and leave it.

Images Product

Buy Kreg R3 Jr. Pocket Hole Jig System Now

Milwaukee Hole Saw Cheap

2010-01-08T01:17:00.001-08:00

Milwaukee Hole Saw Cheap