2-Pack: Hol-E-Cap Cable and Cord Hole Cover Wall Plate with Hole Saw Installation Kit for Drywall - White

Buy Cheap 2-Pack: Hol-E-Cap Cable and Cord Hole Cover Wall Plate with Hole Saw Installation Kit for Drywall - White

Buy Low Price From Here Now
A snap to install! Hol-E-Cap has a patented design for an easy do-it-yourself installation. Its large rotatable port accommodates most HDMI, component, composite, computer, fiber optic, and XBOX360, PS3, Wii and game console cables (1 ¼ max. width). Install it on drywall behind your flat panel TV, games consoles, DVD players and more. Installation guide also provides instructions for installing on surfaces other than drywall. Your satisfaction is guaranteed!
Readmore

Technical Details

- Clean and attractive design to hide hole for cables and cords
- A snap to install in minutes! Patented design; no special tools, screws, electrical box or template
- Kit includes 2 Hol-E-Caps, to install behind the TV and console
- Includes installation guide and hole saw installation tool
- Satisfaction Guaranteed!
See more technical details

 "Easy to install and looks clean and professional" 2010-01-27
By CalBear (San Francisco, CA)
I ordered this item for my office conference room. We just installed a new flat panel monitor and I wanted the cables to have a more professional appearance. This wall cover was extremely easy to install and looked clean and professional. I will definitely use this product at home as well.

 "Hol E Cap Quick and Easy to Install!" 2009-12-28
By JustLikeYou (Danville, CA)
I installed 2 Hol-E-Caps in about 5 minutes for my TV. It comes with a pre sized saw that takes only a few seconds to drill thru 0.5" sheet rock. I liked how no screws were required (hand press fit into the wall) and everything needed is included in the kit. The dome shaped design also looks natural and hides your cables well. Too easy....product recommended!

 "You are gonna love this product!!!" 2009-12-17
By wwyli (Honolulu, HI)
Yup, it was easy to install and it's so much better than the cable grommets that I've used before. Hol-e-caps actually have teeth that attach itself securely onto the drywall so you don't need to glue it like other grommets. The included hole saw was a bonus!

 "COMPLETE WITH FREE HOLE SAW!!" 2009-12-07
By Alejandro (Memphis, Tennessee)
WIFE LOVED IT!!!! Had to cover ugly hole on the wall where my home theater guts spilled out of the wall.. now all gone and neatly covered! HOL-E-CAP was an easy quick solution. Awesome design. Would need more of these covers for my in-ceiling surround speakers. Thank you!

 "I LUV THIS PRODUCT !!" 2009-12-07
By thetamouse

Easy and fast do-it-yourself wall-hole plate, perfect for HDMI, audio plugs and CAT-5 wiring systems. Even comes with a hole saw bit. WOW, NOW THAT'S COMPLETE!


Images Product

Buy 2-Pack: Hol-E-Cap Cable and Cord Hole Cover Wall Plate with Hole Saw Installation Kit for Drywall - White Now

Black & Decker 79-368 Bi-Metal Door Lock Installation Kit

Buy Cheap Black & Decker 79-368 Bi-Metal Door Lock Installation Kit

Buy Low Price From Here Now
For installing lock sets and deadbolt locks in both metal and wood doors. 1 handed rack and pinion system enables the user to quickly and easily secure the guide template to the door. Works with any door width between 1 3 8" to 2 3 8". for both standard b
Readmore

Technical Details

- Compatible with all standard-size wood and metal doors with a width between 1-3/8 inches to two inches
- Stay-in-place guide keeps things steady and secure
- Use with both standard backsets and any latch bore face plate style
- Dimensions: 9.3 x 6.0 x 3.2 inches (WxHxD); weighs 12.0 ounces
- Includes a durable high carbon steel hole saw
See more technical details

 "Door locks made easy" 2010-01-31
By Mark A. Koshmrl
I bought this so I could replace the door handles in my house. Most of them only had a one inch hole for the door knob. The Black and Decker installation kit took all the guess work out of re-doing my doors. Within one hour, I had 5 doors done. It worked great and it was a very resonable price. I highly recommend this to beginners and professionals alike.

 "Decent tool if you know what you are doing" 2008-05-31
By H. Wu
I got this tool from one of the local home improvement store. Amazon's current price is better. In any case, it's cheaper than buying two separate bi-metal hole saws and a mandrel if you are working on only one brand of locks. Used it to install 3 deadbolts on metal doors. Worked just fine. Yes, the plastic guide is just marketing gimmick. Don't use it. Instead, drill a small pilot hole with a drill bit first BEFORE using this tool. Take your time to get it done accurately. And use a strong corded drill with a 1/2'' chuck and a 2nd handle.



Note that when changing the hole saw from the 2-1/8'' to the 1'' one, just remove the inner part of the mandrel, and leave the outer part on the 2-1/8'' saw. The previous reviewer apparently got confused by the instruction.

 "Good luck using this thing" 2007-12-08
By T. Vasquez (Austin, TX USA)
I bought this kit to install some door locks and they're so cheap that they only give you ONE mandrel for two saw bits. The manual tells you to drill the 2 1/8" hole, then "disassemble 2 1/8" hole saw and assemble 1" hole saw". Yeah, good luck... once you drill with one of the saws, that mandrel stays in that saw bit and you won't be able to get it out even with your best wrenches. I'm stalled halfway into my door drilling and am returning this piece of Chinese made junk.

 "Great for wood doors" 2006-04-27
By Jess Wright (Phoenix, MD)
I bought this jig and used it successfully with wood interior doors. It was simple I set the two plastic pieces for the right setback and tightened it onto the door. Drilled the holes and had a great result. I replaced 20 doors with no issues.



I tried using it for a metal door and the bit walked around on the metal. I ended up using the template that came with the lockset. I used a centerpunch and hand drilled it.

 "Think of it as two slightly overpriced bi-metal hole saws." 2005-04-01
By veganMalcontent
This kit is really two bi-metal hole saws, an arbor, and some extra trash to throw out. I bought it to bore out the undersized holes on two metal-clad french doors. I hoped the flimsy plastic guide that comes with this kit would steady the hole saw. The first time I pulled the trigger on the drill, it was like that scene in the New York episode of the Simpsons where Homer uses a jackhammer to remove the boot on his car with comical results. To finish that door I ended up butting some clamps up against the guide to prevent it from moving. For the next door, I'll simply cut a hole in a piece of plywood and clamp the plywood to the door, which will make a much sturdier guide.



For a set of two bi-metal hole saws with an arbor, you can get better quality (DeWalt) for less money. Do yourself a favor and go buy DeWalt hole saws in the same sizes and make a jig similar to the one just described.




Images Product

Buy Black & Decker 79-368 Bi-Metal Door Lock Installation Kit Now

Anytime Tools 5 DIAMOND DUST HOLE SAW for TILE GLASS MARBLE

Buy Cheap Anytime Tools 5 DIAMOND DUST HOLE SAW for TILE GLASS MARBLE

Buy Low Price From Here Now
The diamond coating on these saws give superior performance and life. Excellent results in glass, marble, slate, and tile. Nickel plated. Segmented design works better and lasts longer. Sizes (Shank diameter: 1/4"): 3/4" 1" 1-3/16" 1-3/8" 1-5/8" Note: To prolong the life of these bits, use on a low speed with coolant (water/oil)
Readmore

Technical Details

- Sizes: 1/4", 5/16", 3/8" 1/2", 1"
- Excellent results in glass, marble, slate, and tile.
- Segmented design works better and lasts longer.
- The diamond coating on these saws give superior performance and life.
- Note: To prolong the life of these bits, use on a low speed with coolant (water/oil)
See more technical details

 "Fantastic" 2010-02-26
By A & B Lamps and Lighting
This was my first time to cut glass, and this product works great. I would recommend this to anyone.

 "Works as advertised" 2009-01-11
By Larry E. Page (All over the USA (Fulltime RVer))
I purchased these drill its to make 1/2" holes in glass bricks & bottles so that my wife could put small Christmas lights inside as a holiday decoration. They work well but since there is no centering bit it would be very difficult to start a hole with a hand drill. fortunately I had access to a portable drill press so they worked quite easily. As a caveat, you should go slow with a minimum of pressure and be sure to use water to cool and lubricate as you drill.

 "Diamond Dust Hole Saws" 2008-12-24
By Greg in Alaska (Eagle River, AK United States)
Great product for a good price. No problem drilling through tile. The smaller sizes (e.g., 1/4", 5/16", & 3/8") do not have any means of clearing the flute of debris, whereas other hole saws have openings for just such a purpose. This is the only reason I rate this product a 4 rather than 5; otherwise, a great product that I'd recommend to anyone who needs to drill through ceramic tile.

 "Worked great on Granite countertop" 2008-11-11
By PJIV (Jackson, MS)
Bought the set to drill a hole in 3/4 thick granite countertop to install an undercounter water filter system. Was worried that I needed a much more expensive tool, but it worked like a charm, cutting the hole in less than five minutes of drilling. I kept the bit wet with a sprayer, and used the tip from another poster to clamp a board over the spot and use it as a drill guide.



Not sure whether I will need the rest of the bits, but is a nice tool to have handy in the future.

 "Worked great" 2008-09-18
By Brett R. Cordell (Beaverton, OR United States)
I ordered these hole saws because I wanted to convert a Wine bottle into a lamp.

Unlike the other reviewers I used a wood clamp to hold the bottle on my Drill press. It is recommended to use them at 300 RPM, but my drill press only goes down to 500. I used a small water spritster to wet the area and occasionally add water to the cut. The hole saw worked well in this application.

The problem with using a hole saw without an Arbor is that it will "Wander" and not make a clean initial cut. Once the hole is started it is fine. That is why I used the clamp and drill press. I also wanted to save all of the labels on the bottle, so I minimized the amount of water used. I did also cover the labels with shrink wrap and masking tape to protect them from accidental water damage.




Images Product

Buy Anytime Tools 5 DIAMOND DUST HOLE SAW for TILE GLASS MARBLE Now

Milwaukee 49-22-4175 General Purpose Ice Hardened Hole Saw Kit, 15-Piece

Buy Cheap Milwaukee 49-22-4175 General Purpose Ice Hardened Hole Saw Kit, 15-Piece

Buy Low Price From Here Now
Kit includes 11 cryogenically hardened hole saws in commonly used sizes. U.S.A. Saw Size (in.): 3/4in., 7/8in., 1in., 1 1/8in., 1 3/8in., 1 1/2in., 1 3/4in., 2in. 2 1/8in., 2 1/4in., 2 1/2in., Ice Hardened: Yes, Saw (qty.): 15
Readmore

Technical Details

- ICE HARDENED for up to 50% longer life than the competition
- Matrix II Bi-Metal Teeth for greater durability
- Positive Rake Angle for fast cutting
- Radiused Tooth Back reduces stress on teeth
- Deeper Gullets for fast chip removal and Funtional Slot Geometry provides easy plug removal
See more technical details

 "light duty use only - very expensive for regular use" 2010-02-13
By Michael Winters
We bought these initially for the trucks but quickly found that they were very expensive hole saws on a holes per dollar basis. Cut more than a couple holes in cement board or even MDF and these hole saws are toast - literally with the burn marks on the side of the hole saw. Cutting plywood or MDF or OSB and the material will start to smoke before you can finish the hole.



OK for mild steel and simple projects where time is not important and where you can use a cord drill. For cordless drills these bi-metal hole saws with their tiny high speed steel teeth quickly kill the charge in a battery. We can get 3-4 holes in wood even with 18v lithium-ion batteries.



Problem with all Milwaukee cases is that they don't provide room for adding more hole saw sizes to the kit. You have to buy a new kit and even then most cannot hold a 4-5/8" size needed for making holes for 4" pipe.



Much faster cutting and much longer battery life by using Blue Boar TCT tungsten carbide hole cutters for wood, plaster, composites, fiberglass, cement board and the like or even the Milwaukee Big Hawg hole cutters for wood.



BLUE BOAR TSF12 -12 Piece Tungsten Carbide TCT Self-Feed Hole Saw kit w/ 2-1/4" cutting depth, outperforms self-feed bits & bi-metal hole saws. Cut wood, MDF, OSB, laminates, Hardie & chipboard, plaster, drywall, brick, Formica



Maximum cutting depth is average, neither great nor terrible but it is something to consider if you want to buy tools for general use in lots of different situations. Not important for steel which is where the Milwaukee bi-metal hole saws are best used. "Ice hardening" is wonderful marketing hype but you still have high speed steel cutting tips which are marginal for most materials.

 "Very Nice Set" 2009-04-06
By S. Crane (Tinley Park, IL)
I haven't used every size yet, but they all seem very sharp and the case is quite heavy-duty. The only thing I was let down about was the "case has space for more hole saws" part. There is a small storage space in the top of the case that can fit (3) 1-1/4ish hole saws. You CAN NOT fit any size larger that what is supplied in the case. I bought a 2-3/4" and 3" to finish the set off, but neither will fit in the case, but I didn't think it was fair to deduct a star for that. Overall I'm very satisfied with what I got for the price.


Images Product

Buy Milwaukee 49-22-4175 General Purpose Ice Hardened Hole Saw Kit, 15-Piece Now

Mirka 23-624-100 6" 6-Hole 100 Grit Dustless Hook & Loop Sanding Discs - 50 Pack

Buy Cheap Mirka 23-624-100 6" 6-Hole 100 Grit Dustless Hook & Loop Sanding Discs - 50 Pack

Buy Low Price From Here Now
Mirka Abrasives INC 23-624-100 - Bulldog Gold - 6" 6-HOLE GRIP DISC 100 GRIT, 50/BX - Premium paper for finishing as well as heavy stock removal - Durable aluminum oxide grain delivers a fast, exceptionally long lasting cut - High strength resin bonded system - C & D-weight backings are 50% stronger than other premium brands using A-weight backings - Made with an anti-load stearate to provide increased life.
Readmore

Technical Details

- 6-hole dustless hook and loop sandpaper discs deliver fast and long-lasting results
- Designed to fit DeWalt DW443, Porter Cable 335, 97366, and Bosch 3727DVS
- Durable aluminum oxide and urea resin over glue bonds create a high performance sandpaper
- Includes 50 100-grit discs per box
- Each disc measures 6 inches in diameter
See more technical details

 "Good value" 2009-12-13
By Pete B (Illinois, USA)
I bought these for my dad but have injoyed Mirka sanding disks for years.

Remodling contractor, Pete

 "Good product" 2007-01-04
By Carlgo (Carmel Valley, CA)
The Mirkas were available both at Amazon and my local woodworking tool store, they fit my new Bosch 3727DVS (see review) and so I bought them.



How long they last depends on wise use. I think most people will need 50, 100, 220 and 320. That is $80! However, starting with 50 and working up saves time and makes the disks last much longer. Also, that progression creates very good results; flat, smooth and swirl-free (or very little).



The hook and loop design is great. I used to have sanders that required glue to attach the disks. This is soooo much better. Also, because the disks are so easy to change, you will be more likely to use the correct ones and this extends their life, makes for easier sanding, etc.



When you order disks, be sure you get the right ones! There is no standardization. There are different diameters and different numbers and configurations of holes for the vacuum function. Go out to the garage and double-check!



Make use of the vacuum system. I use a Fein with auto-start and the long 1.25 hose. Something like that will make your dreaded sanding routines much better.



Also, the vac not only cuts down on the dust almost completely (and it turns out that dust is very dangerous), but it sucks the sander down to the surface and that makes it easy to use.



All this costs a lot of money, of course. But, if you do a fair amount of wood work, there is no better or more pleasant way to get that sanding done.



I knocked off a star because I think they are expensive.

 "Works Great" 2002-07-02
By Gregory S Brown (Richardson, TX United States)
Holds up longer than the home center variety. Works great on my Bosch 6".


Images Product

Buy Mirka 23-624-100 6" 6-Hole 100 Grit Dustless Hook & Loop Sanding Discs - 50 Pack Now

MK Morse M45P 7/16-Inch Boxed Hole Saw Arbor Fits AV20-AV96

Buy Cheap MK Morse M45P 7/16-Inch Boxed Hole Saw Arbor Fits AV20-AV96

Buy Low Price From Here Now
Item #: 497-M45P.

• Cutting Bit/Blade Mounting Cutting Overall Arbor Body Chuck Size = 1/2 in
• Cutting Edge Follow Through = 1-1/2 - 6 in
• Hole Shackle Shank Diameter = 7/16 in
• Shank Type = Hex
• Thread Size = 5/8 [Min], 18 [Max]
• Used With = 1-1/4 - 6 in
• Quantity = 1 per box

Customers also search for: Tools and Storage\Power Tools\Drilling and Fastening Tools\Hole Saws Discount 7/16" Hex Fits A20-a96, Buy 7/16" Hex Fits A20-a96, Wholesale 7/16" Hex Fits A20-a96, 050326140164, M45P, Hole Saw Tools
Readmore

Technical Details

- Sold Individually
See more technical details

 "Not perfect but USA made" 2009-09-14
By A_G (CA United States)
This hole saw arbor isn't perfect, as there is noticeable wobble, but it is made in USA so that is a plus for me. I've found that all hole saws and arbors wobble, so for all practical purposes this seems to be as good as it will get for me. The shank on this arbor is hollow to allow the pilot drill to go through it, so be careful not to tighten it too much in your chuck or you can crack and break it. I did this with a Milwaukee arbor in my Jacobs "super duty ball bearing chuck" which can REALLY hold tight.

 "surprisingly sloppy fit" 2009-05-09
By blekenbleu
.. even on their hole saw own blades.

I wonder whether another arbor (e.g. Dewalt's) would be more confidence-inspiring.

 "It worked good." 2009-02-16
By F. Merz
This hole saw cut through an Ibeam, 1/4" thick. I had to make 4 cuts and several through wood. It cut through them all. The only issue, was the holes in the arbor did not exactly line up when it was tight. Overall I was impressed. I would buy other hole saws from Morse.


Images Product

Buy MK Morse M45P 7/16-Inch Boxed Hole Saw Arbor Fits AV20-AV96 Now

Milwaukee 49-22-4105 19-Piece Master Electricians Ice Hardened Hole Saw Kit

Buy Cheap Milwaukee 49-22-4105 19-Piece Master Electricians Ice Hardened Hole Saw Kit

Buy Low Price From Here Now
Kit includes 19 cryogenically hardened hole saws in sizes often used by electricians. U.S.A. Professional Series: Yes, Saw Size (in.): 3/4in., 7/8in., 1 1/8in., 1 3/8in., 1 1/2in., 1 3/4in., 2in., 2 1/4in., 2 1/2in., 2 5/8in., 3in., 3 5/8in., 4 1/8in., 4 3/4in., Ice Hardened: Yes, Saw (qty.): 19
Readmore

Technical Details

- ICE HARDENED for up to 50% longer life than the competition
- Matrix II Bi-Metal Teeth for greater durability
- Positive Rake Angle for fast cutting
- Radiused Tooth Back reduces stress on teeth
- Deeper Gullets for fast chip removal and Funtional Slot Geometry provides easy plug removal
See more technical details

 "Good Buy" 2009-11-10
By P. Graves
Excellent hole saw kit for any tradesman. Sturdy, durable materials make this a well built kit. Bits are nice and sharp which makes for clean cut holes.

 "I'm very impressed with this kit" 2009-11-05
By Paul N. Reeder
So far, I've used these saws to cut holes in plastic, drywall, and red oak. Minding speed for material being cut, the results have always been outstanding. I've had opportunity to chuck the saws in both a 18V cordless drill and a 16.5" drill press with no problems. This kit provides a great range of sizes and these guys stay sharp! Very nice case set up wisely which conserves room yet still makes each of the saws easily accessible. To sum it up, this "Made in the U.S.A." kit is a great deal for the money and I, personally, would buy it again in a heartbeat!

 "Nice Assortment, great cut" 2009-06-08
By Mark (DFW area, TX)
I do a far share of electrical, plus other odd projects around house. This set has been great. The case even has room to fit a couple duplicate Hole Saws I had before buying a set.



With proper care and usage these blades hold up for a long life.


Images Product

Buy Milwaukee 49-22-4105 19-Piece Master Electricians Ice Hardened Hole Saw Kit Now

Mirka 23-624-060 6" 6-Hole 60 Grit Dustless Hook & Loop Sanding Discs - 50 Pack

Buy Cheap Mirka 23-624-060 6" 6-Hole 60 Grit Dustless Hook & Loop Sanding Discs - 50 Pack

Buy Low Price From Here Now
Mirka Abrasives INC 23-624-060 - Bulldog Gold - 6" 6-HOLE GRIP DISC 60 GRIT, 50/BX - Premium paper for finishing as well as heavy stock removal - Durable aluminum oxide grain delivers a fast, exceptionally long lasting cut - High strength resin bonded system - C & D-weight backings are 50% stronger than other premium brands using A-weight backings - Made with an anti-load stearate to provide increased life.
Readmore

Technical Details

- 6-hole dustless hook and loop sanding discs deliver fast and long-lasting results
- Designed to fit DeWalt DW443, Porter Cable 335, 97366, and Bosch 3727DVS
- Durable aluminum oxide and urea resin over glue bonds create a high-performance sandpaper
- Includes 50 60-grit discs per box
- Each disc measures 6 inches in diameter
See more technical details

 "cabinet maker" 2009-06-10
By glenn monroe (ct.)
The Mirka sand paper is a lower cost lower quality sand paper. The saying you pay for what you get is very true here. Some times you need a lower quality paper.

 "you gotta send the right product" 2008-09-07
By Robert W. Good (CRESTED BUTTE,CO)
I live on top of a hill in Colorado, I do not have postal service. I use a friends house for delivery of on-line orders, it takes more than a hour of driving to pick up my order. Twice you sent me the wrong product, no-hole instead of 6 hole, very frustrating.

 "horrible" 2008-09-01
By Michael J. Karman
I ordered this 6 holed dustless paperand it came with no holes, even after I sent itbackonceyou sent the same paper with no holes again. Totally useless.

 "Better than the alternative..." 2007-04-02
By Mr. M (Bremerton, WA United States)
Free shipping got this to me in just a few days despite the longer estimates. For less than half the price per disk and double the wear life of my only alternative available at Home Depot, these babies were a major find! I ended up using a lot less than I had anticipated, and now I have a ton left for subsequent projects.

 "Mirka sanding discs" 2005-08-07
By Stan Alexander (USA)
These discs were used with a Porter Cable sander. I used approximately 95 discs from this purchase restoring redwood decking. they did not clog or fill excessively and were extremely uniform in theri finish.


Images Product

Buy Mirka 23-624-060 6" 6-Hole 60 Grit Dustless Hook & Loop Sanding Discs - 50 Pack Now